NEC manual Removing the Audio Board, NEC Versa M320 Disassembly Manual

Page 22

Removing the Audio Board

Removing the Audio Board

To remove the Audio board, first remove the Top Cover (see Removing the Top Cover), remove the FDD (see Removing the FDD) then perform the following steps:

1.Remove the screws on the Audio board and disconnect the speaker cable as shown in Fig. 39 .

Fig. 39 Audio Board screws and speakers connector

2. Carefully remove the audio front panel as shown in Fig. 40 and put it aside.

Fig. 40 Removing the audio front panel

3. Lift up the audio board as shown in Fig. 41 and put it aside.

M2x4.5 Silver

NEC Versa M320 Disassembly Manual

Page 22

Image 22

Contents Versa M320 Disassembly Manual Table of contents NEC Versa M320 Disassembly ManualOverview Disassembly InstructionsReassembly Instructions Technician NotesAvoid Electrostatic Discharge Power Supply UnitHazardous Voltage AVERTISSEMENTRemoving the Battery Removing the Hard Disk DriveRemoving the Memory Module Removing the Wireless LAN & MDC Modem Module Removing the Keyboard Fig. 11 Releasing the optical drive Removing the optical disk driveFig. 10 Removing the keyboard flat cable Fig. 12 Removing the optical driveRemoving the CPU Fig. 14 Removing the heat plate4. Lift up the LED board as shown in Fig Fig. 19 Releasing the CPU Heat Sink Fig. 18 Lifting up the CPU fanM2x10 Silver Fig. 20 Removing the heat sink Fig. 21 Releasing the CPUFig. 22 Removing the Coil Removing the LCD ModuleFig. 23 Removing the LCD hinges screws Fig. 24 Releasing the plastic hinge covers Fig. 25 Lifting up the LCD moduleDisassembling the LCD Panel 4. Unscrew all screws encircled in Fig Fig. 32 Removing Wireless Antenna Removing the Top CoverFig. 31 Removing the LCD Panel hinges A = M2.5x7 Silver B = M2x4.5 Silver M2.5x7 Silver Fig. 33 Removing the top cover screwsA = M2x4.5 Silver Fig. 36 Touch Pad Assembly Removing the Touch PadFig. 35 Removing the top cover Fig. 37 Removing the FDD Removing the Floppy Disk DriveFig. 38 Lifting up the FDD Fig. 39 Audio Board screws and speakers connector Removing the Audio BoardFig. 40 Removing the audio front panel Fig. 43 Removing the HDD flat cable connector Removing the Main BoardFig. 42 Removing the RTC Battery Fig. 41 Lifting the Audio BoardA = M2.5x5 Silver B = M2x4 Silver Fig. 44 Removing the main board screwsFig. 45 Remove the spacers on the I/O panel C = M2.5x5 Silver D = M5x6 SilverFig. 46 Removing Main Board Removing the speakersFig. 47 Screw at Audio Board Holder Description DIP Switch SettingDip Switch SeetingScrews Versa M320 Disassembly Manual