NEC DIP Switch Setting, NEC Versa M320 Disassembly Manual, Dip Switch, Description, Seeting

Page 26

DIP Switch Setting

DIP Switch Setting

Dip Switch	Description				Seeting
SW1 Bit1	Keyboard				Refer to the below table
	Select1
SW1 Bit2	Keyboard				Refer to the below table
	Select2
SW2 Bit1	CMOS password				ON: Password Override
					OFF: Normal (Default)
SW2 Bit2	Security				ON : Security By Pass
					OFF: Security Mode
SW3 Bit1	Mobo ID				Reserved

SW3 Bit2	DVDSEL				ON: Default
					CD-ROM CD-224E-CN4
					CD-ROM CRN8245B-ANCB17
					CR-RW UJDA360NE3-Z
					DVD-ROM SDC2612-NEN-MJ

		Bit 1	Bit 2	Keyboard code
		OFF	OFF	JP Keyboard (Lavie)
		ON	OFF	US Keyboard
		OFF	ON	UK Keyboard
		ON	ON	JP Keyboard (Versa Pro)

NEC Versa M320 Disassembly Manual

Page 26

Image 26

Contents Versa M320 Disassembly Manual Table of contents NEC Versa M320 Disassembly ManualOverview Disassembly InstructionsReassembly Instructions Technician NotesAvoid Electrostatic Discharge Power Supply UnitHazardous Voltage AVERTISSEMENTRemoving the Battery Removing the Hard Disk DriveRemoving the Memory Module Removing the Wireless LAN & MDC Modem Module Removing the Keyboard Fig. 11 Releasing the optical drive Removing the optical disk driveFig. 10 Removing the keyboard flat cable Fig. 12 Removing the optical driveRemoving the CPU Fig. 14 Removing the heat plate4. Lift up the LED board as shown in Fig M2x10 Silver Fig. 18 Lifting up the CPU fanFig. 19 Releasing the CPU Heat Sink Fig. 20 Removing the heat sink Fig. 21 Releasing the CPUFig. 23 Removing the LCD hinges screws Removing the LCD ModuleFig. 22 Removing the Coil Fig. 24 Releasing the plastic hinge covers Fig. 25 Lifting up the LCD moduleDisassembling the LCD Panel 4. Unscrew all screws encircled in Fig Fig. 31 Removing the LCD Panel hinges Removing the Top CoverFig. 32 Removing Wireless Antenna A = M2x4.5 Silver Fig. 33 Removing the top cover screwsA = M2.5x7 Silver B = M2x4.5 Silver M2.5x7 Silver Fig. 35 Removing the top cover Removing the Touch PadFig. 36 Touch Pad Assembly Fig. 38 Lifting up the FDD Removing the Floppy Disk DriveFig. 37 Removing the FDD Fig. 40 Removing the audio front panel Removing the Audio BoardFig. 39 Audio Board screws and speakers connector Fig. 43 Removing the HDD flat cable connector Removing the Main BoardFig. 42 Removing the RTC Battery Fig. 41 Lifting the Audio BoardA = M2.5x5 Silver B = M2x4 Silver Fig. 44 Removing the main board screwsFig. 45 Remove the spacers on the I/O panel C = M2.5x5 Silver D = M5x6 SilverFig. 47 Screw at Audio Board Holder Removing the speakersFig. 46 Removing Main Board Description DIP Switch SettingDip Switch SeetingScrews Versa M320 Disassembly Manual