Lexmark 240n manual Operator panel codes Print side two of a duplex job, Toner low

Operator panel codes

Print side two of a duplex job

Light sequence:

•Continue—Blink

•Load Paper—On

What this light sequence means:

Print the other side of your duplex print job.

What you can do:

•Reinsert your print job in tray 1 using the instructions in the driver pop-up

menu to orient the pages correctly. Press Continue	to resume
printing.

•Press and hold Cancel to reset the printer.

Toner low

Light sequence:

•Toner Low/Replace PC Kit—On

What this light sequence means:

The printer is ready to receive and process data. In addition, the toner in the toner cartridge is getting low.

What you can do:

•Press Continue to print the menu settings page for a list of current printer settings.

•Remove the toner cartridge and shake it to extend the life of the cartridge.

•Replace the toner cartridge. (See How to change a toner cartridge on page 92 for help.)

• Press and hold Cancel to reset the printer.

Note: This light will not come on if the starter toner cartridge is installed.

63