Lexmark 240n manual Network menu, Parallel menu

Configuration menus overview

Network menu

Use the Network menu to change printer settings on jobs sent through a network port (either Standard Network or Network Opt <x>).

Setting	Use this setting to	Values
NPA Mode	Send print jobs to the printer and query	•	Off
	printer status information simultaneously.	•	Auto*
Mac Binary PS	Configure the printer to process Macintosh	• Off—The printer filters PostScript print jobs using
	binary PostScript print jobs.		standard protocol.
		• On—The printer processes raw binary PostScript
			print jobs from computers using the Macintosh
			operating system. This setting often causes
			Windows print jobs to fail.
		• Auto*—The printer processes print jobs from
			computers using either Windows or Macintosh
			operating systems.
Set Card Speed	Automatically detect the connection speed	• Auto*—The printer detects current network
	of your network. You can disable this		speed.
	setting to set the speed manually.	• 10Mbps†, Half Duplex—Forces the printer to try
			to connect to the network only at 10Mbps, Half
			Duplex.
		• 10Mbps, Full Duplex—Forces the printer to try to
			connect to the network only at 10Mbps, Full
			Duplex.
		• 100Mbps, Half Duplex—Forces the printer to try
			to connect to the network only at 100Mbps, Half
			Duplex.
		• 100Mbps, Full Duplex—Forces the printer to try
			to connect to the network only at 100Mbps, Full
			Duplex.
* Factory default
† Megabits per second

Parallel menu

Use the Parallel menu to change printer settings on jobs sent through a parallel port.

Setting	Use this setting to	Values
NPA Mode	Send print jobs to the printer and	•	Off
	query printer status information	•	On
	simultaneously.	•	Auto*
Protocol	Receive information at a much higher	•	Standard
	transmission rate if your printer is set	•	Fastbytes*
	to Fastbytes (if your computer
	supports Fastbytes), or receive
	information at a normal transmission
	rate if your printer is set to Standard.
* Factory default

82