Lexmark 240n manual Operator panel codes Memory full, Short paper

Operator panel codes

Memory full

Light sequence:

•Continue—On

•Ready—On

•Toner Low/Replace PC Kit—On

•Error—On

What this light sequence means:

The printer is processing data, but the memory used to store pages is full.

What you can do:

•Press Continue to clear the message and continue printing the job (the job may not print correctly).

•Press and release Cancel to cancel the print job.

•Press and hold Cancel to reset the printer.

•To avoid this error in the future:

–Simplify the print job. Reduce the complexity of the page by reducing the amount of text or graphics on the page and deleting unnecessary downloaded fonts or macros.

–Install additional printer memory (see How to add a memory card on page 49).

Short paper

Light sequence:

•Continue—On

•Ready—On

•Load Paper—On

•Error—On

What this light sequence means:

The paper length is too short to print the formatted data. This occurs when the printer does not know the media size loaded in the tray, or there is a problem feeding the media.

What you can do:

•Make sure the print media you loaded is large enough.

•Open the front cover, clear the paper path, and close the cover to resume printing (see How to clear paper jams on page 34).

•	Press Continue	to clear the message and continue printing the job.
•	Press Cancel	to cancel the print job.

78