Lexmark 2500 manual Edition notice, Product name Machine type Model number

Page 75

Notices

75

Notices

	Product name	Machine type	Model number

	Lexmark 2580	2580	100

	Lexmark 2580n	2580	110

	Lexmark 2581	2581	100

	Lexmark 2581n	2581	110

	Lexmark 2590	2590	100

	Lexmark 2590n	2590	110

	Lexmark 2591	2591	100

	Lexmark 2591n	2591	110

Edition notice

January 2014

The following paragraph does not apply to any country where such provisions are inconsistent with local law:

LEXMARK INTERNATIONAL, INC., PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions; therefore, this statement may not apply to you.

This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in later editions. Improvements or changes in the products or the programs described may be made at any time.

References in this publication to products, programs, or services do not imply that the manufacturer intends to make these available in all countries in which it operates. Any reference to a product, program, or service is not intended to state or imply that only that product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any existing intellectual property right may be used instead. Evaluation and verification of operation in conjunction with other products, programs, or services, except those expressly designated by the manufacturer, are the user’s responsibility.

For Lexmark technical support, visit support.lexmark.com.

For information on supplies and downloads, visit www.lexmark.com.

If you don't have access to the Internet, you can contact Lexmark by mail:

Lexmark International, Inc.

Bldg 004-2/CSC

740 New Circle Road NW

Lexington, KY 40550

© 2014 Lexmark International, Inc.

All rights reserved.

Image 75

Contents January Users GuideContents Changing tractor positions Understanding Setup mode and menu optionsAdministrative support Paper and specialty media guideSolving paper feed problems TroubleshootingIndex Safety information Part name Learning about the printerPrinter overview Printer front viewPrinter back view Applying control panel overlaysFeature/function 2580/2581 2590/2591 Understanding the printer features and functionsFeature/function All models EAN Printing a demonstrationPrinting a network setup Using IBM emulation mode Printing from Windows or DOSWindows For Forms Printer 2580/2581 users Using Epson emulation modeFor Lexmark Forms Printer 2580/2581 users For Lexmark Forms Printer 2590/2591 usersFor Forms Printer 2590/2591 users Using Okidata Microline emulation modeUsing the control panel Understanding the control panel buttonsButton Function Understanding the control panel lights Setting the printer online or offline Advancing paperLight Light status What it means Using the Load/Unload function Selecting a Tractor modeLocking and unlocking the control panel Disabling Font Lock Selecting and locking a fontDisabling Pitch Lock Selecting and locking a pitchLoading paper Setting the forms thickness leverPaper paths for the push tractor Paper pathsUsing the Tear Off function Setting the Tear Off positionPaper paths for the pull tractor Loading continuous paper Loading continuous forms using the push tractorPage Page Front loading continuous forms using the pull tractor Page Page Bottom loading continuous forms using the pull tractor Page Page Page Page Loading a cut form or envelope manually Loading cut formsLeft paper guide Cut form or envelope Right paper guide Aligning the left margin Setting Top‑Of‑Form for continuous forms in push mode Setting Top-of-FormSetting Top‑Of‑Form for a cut form or an envelope Setting Top‑Of‑Form for continuous forms in pull modeSetting Top‑Of‑Form in a macro Paper and specialty media guide Paper types and sizes supported by the printerPaper types Single Multiple part Envelopes Changing tractor positions Push tractor positionPull tractor position Converting the push tractor to pull tractor position Converting the pull tractor to push tractor position Page Understanding Setup mode and menu options Using Setup modeTo Select Press Control Options Current Press Changing menu settings an exampleData Options Setup Mode Main menuMain menu options Forms Macro OptionsForms Macro options Data options Paper Handling OptionsBuffer Control options Demo Print Paper Out AlarmUni‑Dir Printing Auto Ready Cut SheetEmulation options IBM modeEpson mode OKI modeHonor Init Interface SelectionRemoving the ribbon cartridge Cleaning the printerMaintaining the printer Ordering suppliesRecycling Lexmark products Cleaning the outside of the printerRestoring the EU factory default settings Administrative supportRestoring the factory default settings Restoring the US factory default settingsSupporting SNMPv3 Supporting IPSecClick Certificate Management Using 802.1x authenticationRunning a printer test TroubleshootingTesting the printer Checking an unresponsive printerUsing Hex Trace mode Checking the printer statusControl panel lights Status Action required Make sure the Tractor 2 option is installed correctly. For Adjusting character bidirectional alignment Solving printing problems Printer alarm sounds Printer is noisyPrinter sounds like it is printing, but does not print Printer speed slows Printer power switch is on, but the power light is offLeft margin moves to the right during printing Incorrect line length lines do not start at the left marginPaper is jammed in the printer Solving paper feed problemsPrinting continues beyond the edges of the continuous forms Selected font or pitch is not printing or is changingPaper is jammed in the Auto Sheet Feeder Paper jam in the Tractor 2 FeederPrinter does not feed paper Printer does not feed from the optional Tractor 2 Feeder Printer does not feed from the Auto Sheet FeederAuto Sheet Feeder feeds paper at an incorrect rate Auto Sheet Feeder feeds multiple sheets Paper fed from the Auto Sheet Feeder is skewedSolving print quality problems Print is too lightDots are missing or print quality is poor Graphics do not print Characters are wrong or missingForms are smudged or print is too dark Incorrect number of lines on aIncorrect line spacing or overprinting occurs Contacting Customer SupportProduct name Machine type Model number Edition noticeTrademarks United States Government RightsNoise emission levels Industry Canada compliance statementAvis de conformité aux normes de l’industrie du Canada European Community EC directives conformityMode Description Power consumption Watts Power consumptionPower Saver Statement of Limited WarrantyLimited warranty service Limitation of liability Numerics Index

Related manuals

Manual 83 pages 4.68 Kb