Emerson Epsilon Eb Digital Servo Drive Diagnostic Display, Display Indication Status Description

Diagnostics and Troubleshooting

Diagnostic Display

The diagnostic display on the front of the drive shows drive status and fault codes. When a fault condition occurs, the drive will display the fault code, overriding the status code. The decimal point is “On” when the drive is enabled and the Stop input is not active. This indicates that the drive is ready to run and will respond to motion commands. Commands will not cause motion unless the decimal point is “On”.

Display Indication	Status	Description
		Motor brake is mechanically engaged. This
	Brake Engaged (Output "Off")	character will only appear if the Brake output
		function is assigned to an output line.

Disabled

Power Stage is disabled.

Position

Pulse mode operation.

Velocity

Velocity mode operation.

Torque

Torque mode operation.

Summation

Summation mode operation.

RMS Foldback

Motor torque is limited to 80 percent.

Stall Foldback

Drive output current is limited to 80 percent of drive stall current.

33