Connectity Module | Series 300 ATSs |
Device Configurator Screen for Series 300 ATSs with a PM or DPM
If a Power Manager (PM) or a Digital Power Meter (DPM) is used with a Series 300 ATS, a button appears on the lower left corner of the Connectivity Module Device Configurator screen. Press the Config PM button to display the Power Manager or Power Meter Configuration screen (right side).
Power Manager or Power Meter Configuration
Enter or change the PM or DPM Name (8 char. max.) and Location (20 char. max.). Several configuration settings must be set appropriately. Press the Update button when finished to save the PM or DPM configuration changes.
Input Name & Output Names (Power Manager only)
For a Power Manager, press the Config I/O Name button to display the Input Name and Output Name screen. Enter or change the names (16 char. max.) of the inputs and outputs. Press the Update button when finished to save.
PM or DPM Configuration
Input & Output Names (PM only)
Press Config I/O Name button to display Input & Output Names screen.
Press To PM Config button to return to Power Manager Configuration screen.
Power Manager |
|
|
|
| |
Power Manager |
|
|
name |
| Input names |
|
| |
Power Manager | Output names | |
location | ||
Press Update button when finished to save the configuration changes.
Power Meter
Power Meter
name
Power Meter
location
Press Update button when finished to save the configuration changes.
Press Update button when finished to save the names.
NOTE
Update the PM, DPM, or Group 1 Controller first if you need to update the server. Do not close the browser during the updating process. The PM, DPM, or CP update request will be discarded if the browser is closed.