Primera Technology RX900 user manual Getting Started, Thank YOU…, Choosing a Good Location

Page 5

TOC

INDEX

Section 1: Getting Started

THANK YOU…

...for choosing an RX900 Color RFID Printer. The RX900 Printer will print razor-sharp text and barcodes, vibrant colors, and even stunning photo-realistic photographs directly onto RFID label stock and a variety of other approved media.

This User's Manual is your complete step-by-step guide to quickly and easily setting up and printing with your new RX900!

A. CHOOSING A GOOD LOCATION

•Place the printer on a flat surface in a location with adequate air circulation to prevent internal heat build up.

•Do not place the printer near heat sources such as radiators or air ducts, or in a place subject to direct sun light, excessive dust, mechanical vibration or shock.

•Allow for adequate clearance in front of the printer to accommodate the printed label stock as it is leaving the printer to avoid the possibility of binding or jamming of the label stock.

•Allow for adequate overhead and left side clearance for opening the top cover to allow easy access to the label stock and ink cartridge. The Printer will require 9.5 inches (24 cm) of additional space on the left side to completely open the cover (Total = 26.75" or 68 cm). The Printer will require an additional 15.9 inches (40.4 cm) of overhead space to open the cover (Total = 25" or 63.5 cm).

Getting Started 1

Image 5

Contents 021711-511287 All rights reserved Interactive Feature Table of Contents Page Choosing a Good Location Getting StartedThank YOU… Unpacking and Inspection Identifying the Parts This illustration shows the interior of the printer Recommended PC Specifications Computer SpecificationsLabel Stock Label and Roll SpecificationsLeft margin offset Label Side Out Roll O.D Installing Label Stock Roll Guide Movable Throat Guide Fixed Throat Guide Circular Labels Adjusting the Label Stock TOF TOP of Form SensorThrough-Hole Labels SET the Stock Sensor Mode SET the Output Mode TOC Setup Using RfidSet Marker Printing and Encoding Other Functions Ink Cartridges Status Monitor Monitoring INK Levels Using the Cost Estimator Replacing INK Cartridges / LOW INK Warning TOC TOC Printing Using NicelabelTOC TOC TOC TOC TOC Creating Barcodes in Nicelabel RSS TOC Printing from Other Programs Adjusting Print Alignment TOC Creating a Full Bleed Print Printer Driver Settings To find Driver Settings Portrait Landscape Paper SizeColor Matching Ink Saturation Image is Vertically Offset Troubleshooting and MaintenanceSolving Print Alignment Problems Image is printing horizontally offset Solving Print Quality Problems Maintenance Station Color Matching and Design Tips DPI Image printed with the LX900 TOC Create a Support Report Cleaning the PrinterAutomatic method Cleaning the PrintheadReplacing the Printhead Manual methodTOC TOC Explanation Interpreting the PRINTER’S Indicator LightsSource Location Technical SupportMedia Types Section Technical SpecificationsPrinting History Battery Notice DPI IndexTOF