Xerox KS-801 10/100BASE-TX Fast Ethernet Ports, Auto-negotiation Capable, Auto-speed-sensing

Page 14

3.2 10/100BASE-TX Fast Ethernet Ports

The switch can support connections to the following devices:

•10BASE-T or 10/100BASE-TX network cards

•10BASE-T hub ports

•100BASE-TX hub ports

•10/100BASE-TX dual speed hub ports

•10/100BASE-TX switch ports

Auto-negotiation Capable

The ports support auto-negotiation function when establishing a link connection with any auto-negotiation capable device. The connection speed and duplex mode are determined through the negotiation process with the connected device.

Auto-speed-sensing

When connecting to a non-auto-negotiation device, half duplex mode is used. However, the ports can auto-detect the connection speed.

Manual Configuration

The ports are configured to be enabled for auto-negotiation as factory default. However, it also can be changed and stick to one of the follow- ing configurations through network management operation:

•10M Half-duplex

•10M Full-duplex

•100M Half-duplex

•100M Full-duplex

Trunking Function

The ports are configured as normal data ports instead of trunking ports as factory default. In order to support trunking function, any port can be configured as a trunking port manually through network management operation. As configured, it is no longer a data port. For more details about trunking, refer to section 3.4.

-14-

Image 14

Contents 10/100 Fast Ethernet Managed Switch with Fiber Connectivity Trademarks Table of Contents Console & Telnet Management Web ManagementIntroduction Features Page Specifications Installing the Switch Packing ListPanels Install the Switch into a 19-inch Rack Mounting the SwitchesInstall Rack Mount Brackets Desktop MountingNetwork Switched Ports Making Network Connections10/100BASE-TX Fast Ethernet Switched Ports MDI-X and MDI RJ-45 ConnectorsAuto-negotiation Capable Manual Configuration10/100BASE-TX Fast Ethernet Ports Auto-speed-sensingStraight-through and Crossover UTP Cable Flow ControlUTP Cable Connections Module Connector type Fiber cable Maximum length Fast Ethernet Fiber SlotFiber Module Top view Fiber Jumper Setting Module OutlineModule Installation Duplex Mode SettingSpecifications Switch supports the following trunk configurations Making Trunk ConnectionsPage Monitored Ports When doing sniffer, configureMaking Sniffer Sniffer PortInterpretation LED IndicatorsLED Panels Performing Network Management Management SupportLogin Port Status Management objectsSetting IP Address Console ManagementRefer to for more information Telnet ManagementConsole port does not support modem connection Snmp Management SupportConsole & Telnet Management Select 1 from main menu to set IP address Set IP AddressIP Status Select 2 from main menu to view IP statusView Port Status Port status definitions areView Port Counters View STP Status Page Restore Default Values Update Firmware Console Sftp UtilityPrompts shown on DOS screen are as follows \WINDOWSSFTPRemote Boot System Processing messages shown on console screen areStart Browser Software and Making Connection Set IP Address for the SwitchWeb Management Web BrowserFactory default Username Admin Factory default Password Login to the SwitchLogin Page Port Status Port Statistics Administrator Click Basic to view or modify the following settings BasicIP Address settings are IP AddressUse scroll bar to view all settings as follows Snmp EntriesSnmp settings are Advanced Click Advanced in menu to performAdvanced / Spanning Page Page Value is lower priority. Range 0 Priority is assigned to the switch. The higherMAC address of the switch as a unique identi Fier to the networkBlocking The switch enters the Blocking State if a Ports which are enabled can be in one of the followListening Switches send messages to one another Learning The switch enters the Learning State if noAdvanced / Trunking Advanced / Sniffer Page Console Port Information Port Controls Security Manager System Manager Click System Manager to performTftp Update Firmware Click Apply to start Tftp file transfer operationsPage Remote Boot System