Xerox KS-801 Tftp Update Firmware, Click Apply to start Tftp file transfer operations

Page 61

TFTP Update Firmware

[TFTP Upgrade Firmware] performs software upgrade via TFTP proto- col. Before doing TFTP operation, one TFTP server is required and in- stalled in the network to support the file transfer with the switch. Specify the following information for TFTP operations:

TFTP Server IP Address: IP address of the TFTP server where the firmware is downloaded from.

Firmware File Name : file name of the firmware to be received from TFTP server

Click [Apply] to start TFTP file transfer operations.

-61-

Image 61

Contents 10/100 Fast Ethernet Managed Switch with Fiber Connectivity Trademarks Table of Contents Web Management Console & Telnet ManagementIntroduction Features Page Specifications Packing List Installing the SwitchPanels Install Rack Mount Brackets Mounting the SwitchesInstall the Switch into a 19-inch Rack Desktop MountingMaking Network Connections Network Switched PortsMDI-X and MDI RJ-45 Connectors 10/100BASE-TX Fast Ethernet Switched Ports10/100BASE-TX Fast Ethernet Ports Manual ConfigurationAuto-negotiation Capable Auto-speed-sensingUTP Cable Connections Flow ControlStraight-through and Crossover UTP Cable Fast Ethernet Fiber Slot Module Connector type Fiber cable Maximum lengthModule Outline Fiber Module Top view Fiber Jumper SettingSpecifications Duplex Mode SettingModule Installation Making Trunk Connections Switch supports the following trunk configurationsPage Making Sniffer When doing sniffer, configureMonitored Ports Sniffer PortLED Panels LED IndicatorsInterpretation Management Support Performing Network ManagementManagement objects Login Port StatusConsole Management Setting IP AddressConsole port does not support modem connection Telnet ManagementRefer to for more information Support Snmp ManagementConsole & Telnet Management IP Status Set IP AddressSelect 1 from main menu to set IP address Select 2 from main menu to view IP statusPort status definitions are View Port StatusView Port Counters View STP Status Page Restore Default Values Console Sftp Utility Update Firmware\WINDOWSSFTP Prompts shown on DOS screen are as followsProcessing messages shown on console screen are Remote Boot SystemWeb Management Set IP Address for the SwitchStart Browser Software and Making Connection Web BrowserLogin Login to the SwitchFactory default Username Admin Factory default Password Page Port Status Port Statistics Administrator Basic Click Basic to view or modify the following settingsIP Address IP Address settings areSnmp Entries Use scroll bar to view all settings as followsSnmp settings are Click Advanced in menu to perform AdvancedAdvanced / Spanning Page Page MAC address of the switch as a unique identi Priority is assigned to the switch. The higherValue is lower priority. Range 0 Fier to the networkListening Switches send messages to one another Ports which are enabled can be in one of the followBlocking The switch enters the Blocking State if a Learning The switch enters the Learning State if noAdvanced / Trunking Advanced / Sniffer Page Console Port Information Port Controls Security Manager Click System Manager to perform System ManagerClick Apply to start Tftp file transfer operations Tftp Update FirmwarePage Remote Boot System