Xerox KS-801 operation manual Update Firmware, Console Sftp Utility

Page 35

6.7 Update Firmware

The switch supports Software Upgrade feature via two methods :

1.Via Web management TFTP Update Firmware function. TFTP file transfer functions allow you to perform software upgrade over network.

2.Via Console port. One file transfer utility program SFTP.EXE is provided to perform software upgrade via RS232 console port.

Console SFTP Utility

1.Connect your PC to the switch console port via PC COM port as specified in section 5.4.

2.Start the console management and select Update Firmware command from the main menu of console management screen. When <Waiting

...> message is shown on screen to indicate the switch is ready to receive file from console port.

3.Execute the utility program SFTP.EXE from your DOS window.

4.When finishing the file transfer, reboot your switch to make the firmware update effect.

Contact your dealer for any new available software version.

Select [7] from the main menu to make the switch ready to receive firm- ware file from console port. One DOS utility program SFTP.EXE is pro- vided in the product CD-ROM. This program is used to download the firmware file from PC to the switch via COM port and it must be executed from DOS window.

-35-

Image 35

Contents 10/100 Fast Ethernet Managed Switch with Fiber Connectivity Trademarks Table of Contents Web Management Console & Telnet ManagementIntroduction Features Page Specifications Packing List Installing the SwitchPanels Desktop Mounting Mounting the SwitchesInstall Rack Mount Brackets Install the Switch into a 19-inch RackMaking Network Connections Network Switched PortsMDI-X and MDI RJ-45 Connectors 10/100BASE-TX Fast Ethernet Switched PortsAuto-speed-sensing Manual Configuration10/100BASE-TX Fast Ethernet Ports Auto-negotiation CapableStraight-through and Crossover UTP Cable Flow ControlUTP Cable Connections Fast Ethernet Fiber Slot Module Connector type Fiber cable Maximum lengthModule Outline Fiber Module Top view Fiber Jumper SettingModule Installation Duplex Mode SettingSpecifications Making Trunk Connections Switch supports the following trunk configurationsPage Sniffer Port When doing sniffer, configureMaking Sniffer Monitored PortsInterpretation LED IndicatorsLED Panels Management Support Performing Network ManagementManagement objects Login Port StatusConsole Management Setting IP AddressRefer to for more information Telnet ManagementConsole port does not support modem connection Support Snmp ManagementConsole & Telnet Management Select 2 from main menu to view IP status Set IP AddressIP Status Select 1 from main menu to set IP addressPort status definitions are View Port StatusView Port Counters View STP Status Page Restore Default Values Console Sftp Utility Update Firmware\WINDOWSSFTP Prompts shown on DOS screen are as followsProcessing messages shown on console screen are Remote Boot SystemWeb Browser Set IP Address for the SwitchWeb Management Start Browser Software and Making ConnectionFactory default Username Admin Factory default Password Login to the SwitchLogin Page Port Status Port Statistics Administrator Basic Click Basic to view or modify the following settingsIP Address IP Address settings areSnmp Entries Use scroll bar to view all settings as followsSnmp settings are Click Advanced in menu to perform AdvancedAdvanced / Spanning Page Page Fier to the network Priority is assigned to the switch. The higherMAC address of the switch as a unique identi Value is lower priority. Range 0Learning The switch enters the Learning State if no Ports which are enabled can be in one of the followListening Switches send messages to one another Blocking The switch enters the Blocking State if aAdvanced / Trunking Advanced / Sniffer Page Console Port Information Port Controls Security Manager Click System Manager to perform System ManagerClick Apply to start Tftp file transfer operations Tftp Update FirmwarePage Remote Boot System