Xerox 555 manual Setting the Dial Mode, Dial mode 1.Tone Pulse Call number 10 max

Getting Started

Setting the Dial Mode*

Your machine must be set to the dialing mode compatible with your telephone line requirements. The Dial Modes supported are tone and pulse. Pulse is sometimes referred to as rotary dial.

If your machine is connected to a PBX system, you may need to enter a number to access the outside telephone line.

To set the Dial Mode:

1. Press:

Menu

2.

Select the Dial Mode.

To select tone, press	.
To select pulse, press	.

3.

Dial mode 1.Tone

2.Pulse

Call number (10 max)

[_ ]

Enter the number required to access an outside line, then press Enter. (If no number is required, press Enter.)

The menu selection screen redisplays. Press Exit or Stop to return to the Standby Mode.

*This feature is not allowed in all markets.

3-8 WorkCentre Pro 555, 575