Canon qy8-13az-000 service manual Ink absorber counter setting, User mode

Page 31

<The portion replaced in the partial replacement>

-Entire main ink absorber: Indicated by the green lines

-The portion to be replaced in partial replacement: Indicated by the blue lines

(7) Ink absorber counter setting

Before replacement of the logic board ass'y, check the ink absorber counter value. After the logic board ass'y is replaced, set the ink absorber counter value to the replaced logic board ass'y.

In addition, according to the counter value, replace the ink absorber (ink absorber kit). When the ink absorber is replaced, reset the applicable ink absorber counter (to "0%").

How to check the ink absorber counter value:

See 3-4. Verification Items, (1) Service test print, or (2) EEPROM information print.

How to set the ink absorber counter:

See 3-3. Adjustment / Settings, (9) Service mode, "Ink absorber counter setting procedures."

(8) User mode

 

 

Function

Procedures

Remarks

Print head manual cleaning

- Cleaning both Black and Color:

 

 

Perform via the machine operation panel.

 

 

- Cleaning Black or Color separately, or both Black

 

 

and Color:

 

 

Perform from the MP driver Maintenance tab.

 

Print head deep cleaning

Perform via the machine operation panel, or from the

 

 

MP driver Maintenance tab.

 

ASF paper feed roller cleaning

Front feeder paper feed roller cleaning

Nozzle check pattern printing

Manual print head alignment

Automatic print head alignment

Bottom plate cleaning

Perform via the machine operation panel.

Clean the rollers manually.

Perform via the machine operation panel, or from the MP driver Maintenance tab.

Perform via the machine operation panel, or from the MP driver Maintenance tab.

Perform via the machine operation panel.

Perform via the machine operation panel, or from the MP driver Maintenance tab.

Set a sheet of plain paper (A4 or Letter) in the ASF or the front feeder which is

selected on the Paper Feed Switch button.

Set 2 sheets of plain paper (A4 or Letter) in the ASF or the front feeder which is

selected on the Paper Feed Switch button.

Print head alignment using the first page of Print Head Alignment Sheet.

Set a sheet of plain paper (A4 or Letter) in the ASF or in the front feeder which is selected by the Paper Feed Switch button.

If the automatic print head alignment is not effective, perform the manual print head alignment.

Cleaning of the platen ribs when the back side of paper gets smeared.

Fold a sheet of plain paper (A4 or Letter) in half crosswise, then unfold and set it in the ASF with the folded ridge facing down.

1-26

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Pixma MP510 Revision ScopeTrademarks Manual Outline II. Table of Contents Part 2 Technical Reference Periodic replacement parts MaintenanceAdjustment Periodic maintenanceInk tank target value Customer MaintenanceProduct Life Print headSpecial Tools Part 1 1. MaintenanceSerial Number Location Operator Call Errors by Alarm LED Lit in Orange List of Error Display / IndicationPage Vbus Other Error MessagesLow ink Restrictions on paper USB cable not connected Troubleshooting by Symptom When enlarged in the paper feed direction When enlarged in the carriage movement directionPart 1 2. List of Error Display / Indication At replacement After replacementRepair Part 1 3. Repair 3-1. Notes on Service Part Replacement Side cover L2 and front cover L removal Special Notes on Repair ServicingSide cover R2 and front cover R removal Main case removal Scanner flexible cable attachment Timing sensor unit cable wiring Power supply unit cable wiring Carriage unit flexible cable wiringInk tube installation Emblem removal Platen link assemblyPart 1 3. Repair 3-2. Special Notes on Repair Servicing Paper feed motor adjustment Adjustment / SettingsCarriage rail adjustment Front feeder paper feed roller cleaning Document pressure sheet adjustmentAmount Part 1 3. REPAIR, 3-3 1 to Ink absorber replacement User mode Ink absorber counter settingService mode See Destination settings procedures below Ink absorber counter value to be set % Part 1 3. Repair 3-3. Adjustment / Settings 6 to Verification Items Service test printService test print sample Print sample Eeprom information printPart 1 3. Repair Verification Items Printed itemsMachine Transportation Part NEW Technologies Cleaning Mode and Amount of INK Purged Part 2 2. Cleaning Mode and Amount of INK Purged Normal Color Printing via Computer Print ModeBorderless Printing via Computer Normal Grayscale Printing via ComputerManual Duplex Printing via Computer Card / Camera Direct Printing Part 2 3. Print ModeCopying FAQ Problems Specific to the MP510 and Corrective Actions To the table of contents To the top Part 2 4. FAQ Appendix Pixma MP510 Block DiagramLogic Board Assy Connector Location and PIN LayoutJ301 Print Head 1/3 Carriage Unit Signal name Function Signal name Function Input OutputJ501 LF Encoder Signal name Function J507 Main Cam Sensor Signal name Function Input /Output J502 Ink Sensor / Ink Tank Sensor Signal name FunctionJ503 Power Supply Unit Input / Output J505 Asfpe Sensors Signal name Function Input OutputJ702 LF Motor Signal name Function J701 Carriage Motor Signal name FunctionJ703 Purge Unit Motor Signal name Function J801 Scanner Unit Signal name Function J704 Scanner Motor Signal name FunctionJ901 Memory Card Signal name Function Input Output J902 USB 2.0 I/F Signal name Function Input Output Card Slot Board J1 Logic Board Signal name Function Input / OutputSmgnd J3 CompactFlash Signal name Function J301 Memory Card Board Signal name Function Input / Output J5 IrDA Board Signal name Function Input / OutputOperation Panel Board J2 LCD Unit Signal name Function Input / OutputCarriage Board Signal name FunctionPixma MP510 Specifications Copy ScannerDpof Direct printingPage Supported ink tanks Print head
Top Page Image Contents