Canon qy8-13az-000 service manual Low ink Restrictions on paper USB cable not connected

Page 12
- Fill in all the circles on the Photo Index Sheet.
- Place the sheet in the correct orientation and position.
Solution
- Select Yes, and press the OK button.
=> Printing starts, and it is indicated on the LCD. - Select No, and press the OK button.
=> Printing is cancelled, and the LCD returns to the display immediately before printing was attempted.
Re-select the supported paper type and size.
Connect the USB cable, then turn on the computer.
When one or more images are selected in Layout print, and if a user tries to display the menu or sub-menu, the message is displayed.
- Select Yes, and press the OK button.
=> The image selection is cancelled, and the menu or sub-menu is displayed.
- Select No, and press the OK button.
=> The LCD returns to the display immediately before the message was displayed.
Confirm the following, then try again:

The value exceeds the number of copies you can print.

 

- If images are edited on the computer, print

 

them from the computer.

During selecting images or specifying the

A temporary error. After the error message is

number of copies, the total print quantity

displayed for a while, the last operation before

exceeds the prescribed value of 999.

the error is cancelled, and the total print

 

quantity returns to the value before the error.

Memory card is not set. Insert the card after checking the direction.

DPOF information is not saved in the memory card.

The number of copies to print is not set. Input the number of copies.

This layout is available only for A4 or 8.5"x11"(215x279).

Settings cannot be changed when printing stickers.

No memory card is inserted in the slot.

DPOF print was selected in the menu, but no DPOF files are contained in the memory card.

Multi-photo print was attempted without specifying the print quantity (with the print quantity left "0" (zero)).

In Layout print, "Mixed 1, 2, or 3" which is available only with A4 or LTR size paper is selected, but the paper size is not set to A4 or LTR.

With Sticker print selected, the Settings button was pressed.

Set a memory card.

A temporary error. The error message is displayed for a while, then the LCD automatically returns to the display before the error occurrence.

A temporary error. The error message is displayed for a while, then disappears. Specify the print quantity.

A temporary error. The error message is displayed for a while, then the LCD automatically returns to the display before the error occurrence.

A temporary error. The error message is displayed for a while, then the LCD automatically returns to the display before the error occurrence.

Change the setting after removing the card.

The card is currently write-enabled. Set to read-only mode before performing operation.

The paper size is not correct. Check the page size you have set.

With a memory card inserted in the slot, change of the Read/Write attribute was attempted.

With the memory card set to the Read/write mode, Card Direct printing operation was attempted from the menu.

Non-supported size of paper for PictBridge Camera Direct printing is selected.

A temporary error. Remove the memory card, then change the Read/Write attribute.

A temporary error. Remove the memory card, change the memory card setting to Read-only, then perform Card Direct printing.

Cancel printing on the digital camera. Check the paper size, then print again.

Failed to scan Photo Index Sheet. Check the orientation, position and marking. <See manual>

The machine failed in scanning the Photo Index Press the OK button to clear the error. Sheet.

2-4. Warnings

Warning

Low ink

Restrictions on paper

USB cable not connected

Cancellation of image select information

Message on the LCD

The following ink is low. Continue? (Icon of each ink tank)

Yes No

In Camera Direct Printing, only "Yes" can be selected.

The current paper cannot be set. Change the size and type.

Connect USB cable and turn on the PC. Reset the selected photo information? Yes No

1-7

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Pixma MP510 Scope RevisionTrademarks Manual Outline II. Table of Contents Part 2 Technical Reference Maintenance AdjustmentPeriodic maintenance Periodic replacement partsCustomer Maintenance Product LifePrint head Ink tank target valuePart 1 1. Maintenance Special ToolsSerial Number Location List of Error Display / Indication Operator Call Errors by Alarm LED Lit in OrangePage Other Error Messages VbusLow ink Restrictions on paper USB cable not connected Troubleshooting by Symptom When enlarged in the carriage movement direction When enlarged in the paper feed directionPart 1 2. List of Error Display / Indication After replacement At replacementRepair Part 1 3. Repair 3-1. Notes on Service Part Replacement Special Notes on Repair Servicing Side cover L2 and front cover L removalSide cover R2 and front cover R removal Main case removal Scanner flexible cable attachment Timing sensor unit cable wiring Carriage unit flexible cable wiring Power supply unit cable wiringInk tube installation Platen link assembly Emblem removalPart 1 3. Repair 3-2. Special Notes on Repair Servicing Adjustment / Settings Paper feed motor adjustmentCarriage rail adjustment Document pressure sheet adjustment Front feeder paper feed roller cleaningAmount Part 1 3. REPAIR, 3-3 1 to Ink absorber replacement Ink absorber counter setting User modeService mode See Destination settings procedures below Ink absorber counter value to be set % Part 1 3. Repair 3-3. Adjustment / Settings 6 to Service test print Verification ItemsService test print sample Eeprom information print Print samplePrinted items Part 1 3. Repair Verification ItemsMachine Transportation Part NEW Technologies Cleaning Mode and Amount of INK Purged Part 2 2. Cleaning Mode and Amount of INK Purged Print Mode Normal Color Printing via ComputerNormal Grayscale Printing via Computer Borderless Printing via ComputerManual Duplex Printing via Computer Part 2 3. Print Mode Card / Camera Direct PrintingCopying FAQ Problems Specific to the MP510 and Corrective Actions To the table of contents To the top Part 2 4. FAQ Appendix Block Diagram Pixma MP510Connector Location and PIN Layout J301 Print Head 1/3 Carriage Unit Signal name FunctionSignal name Function Input Output Logic Board AssyJ501 LF Encoder Signal name Function J502 Ink Sensor / Ink Tank Sensor Signal name Function J503 Power Supply Unit Input / OutputJ505 Asfpe Sensors Signal name Function Input Output J507 Main Cam Sensor Signal name Function Input /OutputJ701 Carriage Motor Signal name Function J702 LF Motor Signal name FunctionJ703 Purge Unit Motor Signal name Function J704 Scanner Motor Signal name Function J801 Scanner Unit Signal name FunctionJ901 Memory Card Signal name Function Input Output J902 USB 2.0 I/F Signal name Function Input Output J1 Logic Board Signal name Function Input / Output Card Slot BoardSmgnd J3 CompactFlash Signal name Function J5 IrDA Board Signal name Function Input / Output J301 Memory Card Board Signal name Function Input / OutputJ2 LCD Unit Signal name Function Input / Output Operation Panel BoardSignal name Function Carriage BoardPixma MP510 Specifications Scanner CopyDirect printing DpofPage Print head Supported ink tanks
Top Page Image Contents