Canon qy8-13az-000 service manual Service mode

Page 32

(9) Service mode

Function

Service test print

-Model name

-Destination

-ROM version

-USB serial number

-Ink absorber counter value (ink amount in the ink absorber)

-Ink system function check result

EEPROM information print

-Model name

-Destination

-ROM version

-Ink absorber counter value (ink amount in the ink absorber)

-Print information

-Error information, etc.

EEPROM initialization

Procedures

See "Service mode operation procedures" below.

See "Service mode operation procedures" below.

See "Service mode operation procedures" below.

Remarks

Set a sheet of A4 or letter size paper.

For print sample, see 3-4. Verification Items, (1) Service test print, <Service test print sample>.

Set a sheet of A4 or letter size paper.

The following items are NOT initialized, and the shipment arrival flag is not on:

-USB serial number

-Destination settings

-Ink absorber counter value (ink amount in the ink absorber)

Ink absorber counter reset

See "Service mode operation procedures"

 

below.

Destination settings

See "Service mode operation procedures"

 

below.

Button and LCD test

See "Service mode operation procedures"

 

below.

Ink absorber counter setting

See "Service mode operation procedures"

 

below.

<Service mode operation procedures>

1)With the machine power turned off, while pressing the Stop/Reset button, press and hold the ON/OFF button. (DO NOT release the buttons). The Power LED lights in green to indicate that a function is selectable.

2)While holding the ON/OFF button, release the Stop/Reset button. (DO NOT release the ON/OFF button.)

3)While holding the ON/OFF button, press the Stop/Reset button 2 times, and then release both the ON/OFF and Stop/Reset buttons. (Each time the Stop/Reset button is pressed, the Alarm and Power LEDs light alternately, Alarm in orange and Power in green, starting with Alarm LED.)

4)When the Power LED lights in green (and "CANON Idle" is displayed on the LCD), press the Stop/Reset button the specified number of time(s) according to the function listed in the table below, then press the ON/OFF button. (Each time the Stop/Reset button is pressed, the Alarm and Power LEDs light alternately, Alarm in orange and Power in green, starting with Alarm LED.)

Time(s)

LED indication

Function

0 times

Green (Power)

Power off

1 time

Orange (Alarm)

Service test print

2 times

Green (Power)

EEPROM information print

3 times

Orange (Alarm)

EEPROM initialization

4 times

Green (Power)

Ink absorber counter

 

 

resetting

5 times

Orange (Alarm)

Destination settings

 

 

1-27

Remarks

When the print head is not installed, the carriage returns and locks in the home position capped.

See 3-4. Verification Items, (1) Service test print.

See 3-4. Verification Items, (2) EEPROM information print.

See "Ink absorber counter resetting procedures" below.

Press the Stop/Reset button the specified number of time(s) according to the destination.

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Pixma MP510 Trademarks ScopeRevision Manual Outline II. Table of Contents Part 2 Technical Reference Maintenance AdjustmentPeriodic maintenance Periodic replacement partsCustomer Maintenance Product LifePrint head Ink tank target valueSerial Number Location Part 1 1. MaintenanceSpecial Tools List of Error Display / Indication Operator Call Errors by Alarm LED Lit in OrangePage Other Error Messages VbusLow ink Restrictions on paper USB cable not connected Troubleshooting by Symptom When enlarged in the carriage movement direction When enlarged in the paper feed directionPart 1 2. List of Error Display / Indication Repair After replacementAt replacement Part 1 3. Repair 3-1. Notes on Service Part Replacement Special Notes on Repair Servicing Side cover L2 and front cover L removalSide cover R2 and front cover R removal Main case removal Scanner flexible cable attachment Timing sensor unit cable wiring Carriage unit flexible cable wiring Power supply unit cable wiringInk tube installation Part 1 3. Repair 3-2. Special Notes on Repair Servicing Platen link assemblyEmblem removal Carriage rail adjustment Adjustment / SettingsPaper feed motor adjustment Document pressure sheet adjustment Front feeder paper feed roller cleaningAmount Part 1 3. REPAIR, 3-3 1 to Ink absorber replacement Ink absorber counter setting User modeService mode See Destination settings procedures below Ink absorber counter value to be set % Part 1 3. Repair 3-3. Adjustment / Settings 6 to Service test print Verification ItemsService test print sample Eeprom information print Print samplePrinted items Part 1 3. Repair Verification ItemsMachine Transportation Part NEW Technologies Cleaning Mode and Amount of INK Purged Part 2 2. Cleaning Mode and Amount of INK Purged Print Mode Normal Color Printing via ComputerManual Duplex Printing via Computer Normal Grayscale Printing via ComputerBorderless Printing via Computer Copying Part 2 3. Print ModeCard / Camera Direct Printing FAQ Problems Specific to the MP510 and Corrective Actions To the table of contents To the top Part 2 4. FAQ Appendix Block Diagram Pixma MP510Connector Location and PIN Layout J301 Print Head 1/3 Carriage Unit Signal name FunctionSignal name Function Input Output Logic Board AssyJ501 LF Encoder Signal name Function J502 Ink Sensor / Ink Tank Sensor Signal name Function J503 Power Supply Unit Input / OutputJ505 Asfpe Sensors Signal name Function Input Output J507 Main Cam Sensor Signal name Function Input /OutputJ703 Purge Unit Motor Signal name Function J701 Carriage Motor Signal name FunctionJ702 LF Motor Signal name Function J901 Memory Card Signal name Function Input Output J704 Scanner Motor Signal name FunctionJ801 Scanner Unit Signal name Function J902 USB 2.0 I/F Signal name Function Input Output J1 Logic Board Signal name Function Input / Output Card Slot BoardSmgnd J3 CompactFlash Signal name Function J5 IrDA Board Signal name Function Input / Output J301 Memory Card Board Signal name Function Input / OutputJ2 LCD Unit Signal name Function Input / Output Operation Panel BoardSignal name Function Carriage BoardPixma MP510 Specifications Scanner CopyDirect printing DpofPage Print head Supported ink tanks
Top Page Image Contents