Display installation
Prior to installing your CORONIS FUSION 10MP display and connecting all necessary cables, make sure to have a suitable display controller physically installed in your computer. If you are using a Barco display controller, please consult the user guide delivered with it to do this.
Removing the covers
CONNECTOR COMPARTMENT COVER
The connector compartment cover should be removed to get access to the connectors. To remove the cover, proceed as follows:
1Gently lift the clips at one of the handles of the connector compartment cover to release that side of the cover.
2Do the same at the other side of the cover.
3Remove the cover.
Coronis Fusion 10MP 11