Keys sound
ABOUT THE KEYS SOUND
By default, the keys will make a “beep” sound on every touch. However, this sound can be disabled so that no sound will be heard when using the keys.
TO ENABLE/DISABLE THE KEYS SOUND:
1Bring up the OSD main menu.
2Navigate to the Configuration > User Interface > Controls menu.
3Enter the Sound submenu.
4Select Enabled/Disabled as desired and confirm.
DPMS mode
ABOUT DPMS MODE
Enabling the Display Power Management System (DPMS) mode on your display will optimize its diagnostic lifetime by automatically switching off the backlight when the display is not used for a specified period of time. By default, DPMS mode is enabled on your display, but it also needs to be activated on your workstation. To do this, go to the “Power options properties” window of your workstation.
Barco recommends setting DPMS activation after 20 minutes of
TO ENABLE/DISABLE DPMS MODE ON YOUR DISPLAY:
1Bring up the OSD main menu.
2Navigate to the Configuration > Power Management menu.
3Enter the DPMS Mode submenu.
4Select Enabled/Disabled as desired and confirm.