Keys indicator lights
ABOUT THE KEYS INDICATOR LIGHTS
By default, after lighting up, the keys indicator lights will dim again if no further actions are taken within the following 5 seconds. However, this behavior can be changed so that the keys indicator lights are always on or always off.
TO CONFIGURE THE KEYS INDICATOR LIGHTS:
1Bring up the OSD main menu.
2Navigate to the Configuration > User Interface > Indicator Lights menu.
3Enter the Keys submenu.
4Select Automatic/Always On/Always Off as desired and confirm.
Power lock function
ABOUT THE POWER LOCK FUNCTION
By enabling the power lock function, the CORONIS FUSION 10MP display is forced to remain switched on. This means that it can’t be switched to
TO ENABLE/DISABLE THE POWER LOCK FUNCTION:
1Bring up the OSD main menu.
2Navigate to the Configuration > User Interface > Controls menu.
3Enter the Power Lock submenu.
4Select Enabled/Disabled as desired and confirm.