Luminance target
ABOUT THE LUMINANCE TARGET
The luminance target of your CORONIS FUSION 10MP display is adjustable over a predefined range. When you change the luminance target, the display will adjust its backlight to reach the target.
TO SET THE LUMINANCE TARGET:
1Bring up the OSD main menu.
2Navigate to the Configuration > Calibration menu.
3Enter the Luminance Target submenu.
4Set a luminance target value as desired and confirm.
Viewing modes
ABOUT VIEWING MODES
The CORONIS FUSION 10MP display can be used in two viewing modes:
Diagnostic | This mode provides the full calibrated |
| luminance and is intended for using the |
| display for diagnostic purposes. |
|
|
Text | In this mode, the luminance is reduced to |
| approximately half of the luminance. This is |
| intended for using the display with office |
| applications such as word processing. |
|
|
TO SELECT A VIEWING MODE:
1Bring up the OSD main menu.
2Navigate to the Configuration > Calibration menu.
3Enter the Viewing Mode submenu.
4Select Diagnostic/Text as desired and confirm.