Navigating through the OSD menus
ABOUT OSD MENU NAVIGATION
Navigating through the OSD menu can be done by using the keys or by using the control wheel.
TO NAVIGATE THE OSD MENU USING THE KEYS:
•Use the Right/Down 
and Left/Up 
keys to move through the (sub)menus, change values or make selections.
•To go into a submenu or confirm adjustments and selections, use the Menu/Enter 
key.
•Use the 
key to cancel adjustments or exit a (sub)menu.
•Exit the OSD menu by touching the 
key for approximately 2 seconds.
TO NAVIGATE THE OSD MENU USING THE CONTROL WHEEL:
•Rotate the control wheel to move through the menus, change values or make selections.
•To go into a submenu or confirm adjustments and selections, shortly click the control wheel.
•Click the control wheel for approximately 2 seconds to cancel adjustments or exit a (sub)menu.