Dual 10 | Dual 10 is a Barco specific |
| encoding mode which is usually used on |
| grayscale displays and which allows full |
| refresh rate. |
|
|
Automatic | When selecting this option, your CORONIS |
| FUSION 10MP display will automatically |
| assign the correct video encoding settings |
| to the connected video input signals. |
|
|
TO MANUALLY SELECT A VIDEO ENCODING MODE:
1Bring up the OSD main menu.
2Navigate to the Configuration > Image Sources > (Left/Right) Image Source menu.
3Enter the Video Encoding submenu.
4Select one of the available video encoding modes and confirm.
Grayscale conversion modes
ABOUT GRAYSCALE CONVERSION MODES
Your CORONIS FUSION 10MP display automatically detects the connected video input signals and applies the correct grayscale conversion settings. Manually selecting a grayscale conversion mode is possible, but then your display’s image source selection mode should be set to allow this. Please refer to “Image source selection modes” on page 36 to do this.
Grayscale conversion modes specify how color generated on the display controller is converted to grayscale in your display.
The available grayscale conversion modes are:
Use Red Channel This mode is intended for grayscale displays where gray is sent over the red channel.