OSD menu automatic close function
ABOUT THE OSD MENU AUTOMATIC CLOSE FUNCTION
By default, the OSD menu will disappear automatically after approximately 90 seconds of inactivity. However, this function can be disabled so that the OSD menu remains on the screen until manually closed.
TO ENABLE/DISABLE THE OSD MENU AUTOMATIC CLOSE FUNCTION:
1Bring up the OSD main menu.
2Navigate to the Configuration > User Interface > Menu menu.
3Enter the Automatic Close submenu.
4Select Enabled/Disabled as desired and confirm.
Power status indicator light
ABOUT THE POWER STATUS INDICATOR LIGHT
By default, when the display is switched on, the power status indicator light is dimmed. This behavior can be changed so that the power status indicator light will be blue when the display is switched on.
When the display is in
TO ENABLE/DISABLE THE POWER STATUS INDICATOR LIGHT:
1Bring up the OSD main menu.
2Navigate to the Configuration > User Interface > Indicator Lights menu.
3Enter the Power Status submenu.
4Select Enabled/Disabled as desired and confirm.