SATO 5900RVe Universal Serial BUS USB Adapter, Local Area Network LAN Ethernet, 802.11B Wireless

Page 22

Unit 3: Installation

UNIVERSAL SERIAL BUS (USB) ADAPTER

The Universal Serial Bus (USB) interface is a Plug-In Interface Module that can be installed by the user. It requires a driver (shipped with each printer that has the interface installed) that must be loaded on your PC and the PC must be configured to support USB peripherals using Windows 98 or above. Details for loading the USB driver are contained in the USB Interface Manual that is shipped with each printer with a USB Optional interface installed. Up to 127 devices may be connected to a USB port using powered hubs.

	SPECIFICATIONS
Printer Connector	USB Type B Plug
Cable	10 feet (3 m) maximum
Host	Windows 98 or above with USB Port
Power Supply	BUS Power through cable
Power Consumption	+5 V at 80 ma

LOCAL AREA NETWORK (LAN) ETHERNET

A Local Area Network (LAN) interface is an optional Plug-In Interface Module that can be installed by the user. It requires a driver shipped with each printer that has the interface installed. The driver that must be loaded on your PC and the PC must be configured to run one of the supported network protocols using a 10/100BaseT LAN connection. Details for loading the LAN driver are contained in the LAN Interface Manual that is shipped with each printer with a LAN Optional interface installed.

	SPECIFICATIONS
Connector	RJ-45 Receptacle
Cable	10/100BaseT Category 5
Power Supply	Powered from printer

802.11B WIRELESS

The wireless print server provides easy printer interface with 802.11b Wi-Fi compliant networks free of wired connections. Each printer is shipped with an integrated driver and interface installed. The driver must be loaded on your PC and the PC must be configured to run one of the supported protocols.

	80211B WIRELESS SPECIFICATIONS
Variable Data Rates		11, 5.5, 2 and 1 Mbps
Frequency Band		2.4 GHz ISM Band
Wired Equivalent Privacy		128 bit, 64 bit (compatible with 40bit), none
Sensitivity		(typ, AAWGN, 8E-2 PER): -91dBm at 1Mbps, -88dBm at 2 Mdps,
		-87dBm at 5.5Mbps, -84dBm at 11Mbps.
Range		100m indoors, 300m outdoors
Protocols		TCP/IP, IPX/SPX, Direct Mode IPX/IP, DLC/LLC, NetBEUI,
		NetBIOS/IP

SATO M5900RVe Operator Manual

PN 9001125A

Page 3-8

Image 22

Contents M5900RVe Direct Thermal Printer Sato America, Inc Table of Contents Maintenance TroubleshootingOperation Introduction About this Manual Result in Presonal InjuryGeneral Description 1a, Primary Components1b, Primary Components Control Features SwitchesPage Technical Data Environmental Physical CharacteristicsPower PrintCharacter Font Capabilities BAR Code Capabilties Downloadable FontsCharacter Control Regulatory ApprovalsInstallation Unpacking & Parts Identification Packed ComponentsMedia Selection Printer InstallationSite Location Media LoadingMedia Loading Interface Selection RS232C SpecificationsRS232 Serial Interface Cable Requirements DB9 RS232C Serial Interface SignalsPIN Direction Signal Definition Host Connection DB9 PrinterACK SpecificationsIEEE1284 Parallel Interface InitUniversal Serial BUS USB Adapter 802.11B Wireless80211B Wireless Specifications Local Area Network LAN EthernetReceive Buffer ACK/NAK ProtocolAccessories Installation Interface Module UpgradeOperation Printer Configuration DIP Switch PanelsDSW1 Function Descriptions DSW1 Default SettingsDSW1 Configuration OFFConfiguration DSW2 Default SettingsDSW2 Configuration DSW1 DSW2 Function DescriptionsDSW3 Default Settings Function DescriptionConfiguration Modes Normal ModeTest Print Mode Test Print ModeAdvanced Mode Advanced ModeDefault Settings Mode Default Settings ModeFlash Memory Download Mode Download Font Deletion Status Description Acsii HEX TransferFlash Memory Download Mode User Download Mode User Download ModeHEX Dump Mode Hex Dump ModeCard Mode Card ModeNON-STANDARD Clear Mode Non-Standard Clear ModeService Mode 10, Service ModeCounters Mode 11, Counters ModeMaintenance Mode Maintenance ModeCard Mode Advanced ModeMenu Description Service Mode Counters Mode Maintenance Mode Print Operational AdjustmentsPotentiometer DESCRIPTION/PROCEDURE OffsetFeed Direction 14, Sensor & Accessory Locations Unit 4 Operation Sato M5900RVe Operator Manual PN 9001125A Troubleshooting LCD Message Beep Error Condition To Clear Uneven Print Darkness Image VoidsLight Print Images Smeared Print ImagesPrinter Creates a Blank Label Meandering MediaIncorrect Label Positioning Troubleshooting Procedures Universal Serial BUS USB Interface Parallel InterfaceLAN Ethernet Interface Page Maintenance Cleaning Procedures From the PRINTER, Exersize Care to Prevent Print Head DamageReplacement Procedures Fuse ReplacementPrint Head Replacement Print Head to Prevent Damage to ITS ElementsInterface Board Replacement Interface Board ReplacementAdjustment Procedures Print Defects Relative ProcedurePrint Head Balance Adjustment Print Head Balance AdjustmentPrint Head Alignment Print Head Alignment