Unit 5: Troubleshooting
NO PRINTED IMAGE
No voltage output. | Test power supply and replace as necessary. |
|
|
Damaged print head. | Replace print head. |
|
|
Damaged electronics. | Replace circuit board. |
|
|
Interface problems. | Check. Refer to relative instructions below. |
|
|
Data input error. | Ensure correct data stream. |
|
|
LCD FIELD ILLUMINATED BUT WITHOUT WORDS OR NO DISPLAY AT ALL | |
|
|
Power cable issues. | Ensure properly connected. Ensure not defective. |
|
|
Incorrectly positioned display potentiom- | Adjust as required. |
eter. |
|
|
|
Defective power supply. | Troubleshoot and replace components as necessary. |
|
|
MEANDERING MEDIA |
|
|
|
Incorrectly loaded media. | Ensure correct loading. |
|
|
Improperly adjusted media guides. | Adjust as required. |
|
|
Unbalanced print head. | Adjust as required. |
|
|
Worn or improperly adjusted platen roller. | Adjust. Replace as required. |
|
|
PRINTER CREATES A BLANK LABEL | |
|
|
Data input error. | Ensure correct data stream. |
|
|
Improper media selected. | Ensure correct media is in use. |
|
|
Disconnected print head. | Cycle off power and ensure proper connection. |
|
|
Defective print head. | Replace print head as required. |
|
|
Defective main board. | Replace main board as required. |
|
|
INCORRECT LABEL POSITIONING |
|
|
|
Incorrect sensor selection. | Ensure the correct sensor is selected. |
|
|
Improper sensor adjustment. | Adjust as required. |
|
|
Incorrect media in use. | Ensure the correct media is being used. |
|
|
Data input error. | Ensure correct data stream. |
|
|
SATO M5900RVe Operator Manual | PN 9001125A | Page |