SATO 5900RVe manual Counters Mode

Unit 4: Operation

		SERVICE MODE
	MENU	DESCRIPTION
REPRINT W/FEED		Sets reprint of previous labels. Prints one page of the previously
YES	NO	printed contents by pressing the FEED key during ONLINE. The
		default value is NO: do not reprint. LINE key moves the cursor
		and the FEED key selects the option.
FORWARD/BACKFEED		Sets the peel-off paper feed distance. The paper feed/backfeed
DISTANCE DEFAULT		may be set from 0-255mm. The actual Feed/Backfeed distance
		is equivalent to VR value + Paper Feed quantity. LINE key
		moves the cursor and the FEED key selects the option.
EXT PIN9 SELECT		Switches to external signal (9 pins) output mode. LINE key
MODE1	MODE2	moves the cursor and the FEED key selects the option.
EURO CODE		Sets Euro Code. Selects the assigned code of the Euro mark.
		The default value is D5 (HEX). LINE key moves the cursor and
		the FEED key selects the option.
SELECT LANGUAGE		Sets the language to be displayed on the LCD screen. There
		are eight language options available. LINE key moves the
		cursor and the FEED key selects the option.
PRIORITY SETTING		Sets priority of commands. Sets software commands as being
COMMAND	LCD	invalid in regards to print darkness, print speed, and base
		reference point id LCD is selected. The default value is
		COMMAND: conned settings are valid. LINE key moves the
		cursor and the FEED key selects the option.
IGNORE CAN/DLE		Sets 1 byte command as being valid or invalid. Displays only
YES	NO	when status 4 is selected. A NO value equals: Invalid.
IEEE1284		Sets to ACK signal width of the IEEE1284. Displays only when
ACK SIGNAL 00.5		the IEEE1284 board is installed. The default value is 0.5.

		COUNTERS MODE
	MENU	DESCRIPTION
COUNTERS		Selects the counter category: Print head, Dispenser, Cutter, Life
HD DSP	CUT LIFE	Cycle. LINE key moves the cursor and the FEED key selects
		the option.
HEAD COUNTER		Print Head counter display. Displays the quantity of times the
	0.0M	print head has cycled.
HEAD COUNT CLEAR		Offers the option to reset the counter to zero. The default value
YES	NO	is NO. LINE key moves the cursor and the FEED key selects
		the option.
DSP COUNTER		Dispenser counter display. Displays the quantity of times the
	0.0M	dispenser has cycled.
DSP COUNT CLEAR		Offers the option to reset the counter to zero. The default value
YES	NO	is NO. LINE key moves the cursor and the FEED key selects
		the option.
CUT COUNTER		Cutter counter display. Displays the quantity of times the cutter
	0.0M	has cycled.

SATO M5900RVe Operator Manual PN 9001125A Page 4-21