Setup
Installing the label roll
The method of installing label media varies with your choice of the two possible print modes— ’continuous’ or ‘dispense’ mode.
1.Make sure you can see the red platen roller. If not, slide the dispenser unit down, by lifting its top edge upwards at the two arrow marks.
Now push the dark gray Cover Open/Close lever downwards to release the cover.
2.Place the label roll into the printer. Make sure the label roll is placed with the first label feeding from the bottom of the roll and not from the top (see picture).
Dispenser
unit
Ensure that the first label emerges from the bottom (not top) of the roll.