SATO MB200/201i manual Paper thickness

Page 60

Basic Specifications & Optional Accessories

Paper thickness	0.064 ~ 0.190 mm (use only SATO-
	certified paper).

Shape of paper	Roll paper: Wound with surface out
	Maximum diameter: 57.5 mm

Label size (Liner	Width: 25.4 to 55 mm (28.4 to 57.5
sheet and eye mark	mm)
pitch)	Pitch: 13 to 160 mm (16 to 163
	mm)

Media Roll Size
MB200i:	67 mm (2.63”) outer diameter
MB201i:	58 mm (2.28”) outer diameter
	19 mm inner diameter (core)
	7.9 mm inner diameter (coreless)

Label printing	Continuous, Dispense (peel)
modes

Self-diagnosis	Head check/Cover open/Paper
	end/Battery check/Test print

Power saving	Auto power off after non operation
features	for 5 minutes. With Bluetooth or
	wireless LAN specifications,
	default is no auto power off. Auto
	power off time can be changed via
	the printer operation register com-
	mand <PG>.
	For details of the command, refer
	to the Programming Guide.

7-2

Image 60

Contents MB200/201i Operator’sDirectPrinterThermalManual Version SI-MB20xi-01rA-02-05-OM Safety Precautions IiiExplanation of hazard symbols ExampleLiquids Foreign MatterDisassembly Battery careAbnormal Conditions Power Supply Precautions ViiPower ViiiLocation Hazardous partsReplacing the Battery Pack Maintenance and CleaningLong periods of non usage Avoid placement in extreme temperatures When the printer is being transportedDo not disassemble or modify the printer Use only the specified cablesSetupUnpacking ...........the printer 54-1 Key features IntroductionCompliance Statement Setup Part Names Part Names cont’d Power Functions of various partsCharging the battery pack with a charger Charging Time Charging the battery pack with the printer Using the battery pack InsertionRemoval Using the battery pack cont’d Using the optional AC Adapter for power Using the optional AC Adapter for power Installing the label roll Installing the label roll cont’d Installing the label roll cont’d Installing the label roll cont’d Installing the label roll cont’d Operation and Configuration Turning the printerTurning the printer OFF Performing a Test Print Printing via the RS-232C Interface Use the following procedure to print through IrDA interface Printing via the IrDA InterfacePrinting via the Wireless LAN Interface Check the DIP SwitchesPrinting via the Bluetooth Interface Synchronize Bluetooth settingsOnline Optional LCD screenAdjusting Display Contrast Optional LCD screen cont’dPrinting Procedure Adjusting printing for Non-separate labels Choosing the Label Dispensing mode Configuring Dispense mode Type OperationHead Check Setting and Online Command Setting Normal modeOther Printer Modes Test Print Mode Printer modes cont’dSetting Head Check Area cover must be left open Head Check Setting ModeSetting Online Command compatibility Cover must be left open Online Command Compatibility ModeOffset Configuration via Programming Position AdjustmentsOperation and Configuration Interface Specifications Other required settingsRS-232C settings Button held down Deactivate Head Check Interface Specifications Cleaning and Maintenance Cleaning the Print HeadCleaning the Platen and Peel Roller Troubleshooting What to do in caseStatus Troubleshooting Troubleshooting BasicOPTBASCSpecificationsIONALSPECIFICATINSACCESSORIES Basic Specifications & Optional AccessoriesPaper thickness Interfaces Mini DIN RS-232C IrDA communication Complies Switches Environmental Measure to prevent interference e.g., installing partitions Optional Accessories Battery ItemsOptional Accessories Portability enhancements Pass one end Optional Accessories cont’d Portability enhancements Basic Specifications & Optional Accessories Optional Accessories cont’d Connectivity options Factory-installed options