SATO M-84PRO manual Card Mode, Character Pitch Prop Fixed Advanced Mode, Copy Start YES no

Page 42

Section 3. Configuration

CHARACTER PITCH

PROP FIXED

ADVANCED MODE

This selection allows you to set the default character pitch to either fixed character spacing or proportional character spacing.

1.Use the LINE key to step the cursor to the desired setting.

2.Once the correct setting is selected, pressing the FEED key will accept the setting and the display will return to the Advanced Mode display.

To exit the Advanced mode, power the printer off and then back on.

CARD MODE

The Card Mode allows the operator to manage the Expanded Memory (PCMCIA Card or Internal Expanded Flash ROM).

V05.00.03.00

INITIALIZING

ADVANCED MODE

CARD MODE

MEM SELECT (CC1)

CARD MEMORY

CARD->MEMORYCOPY TRUETYPEFONT Y/N

COPY START

YES NO

TRUETYPEFONTCOPY COPYING

Displays the firmware during the initialization.

The Card Mode is entered from the Advanced Mode display by pressing the LINE key once.

The Card Mode display indicates that the printer is in the Card Mode. To advance to the first selection, press the FEED key.

This selection determines which type of optional expanded memory will be addressed as “CC1" in the command streams.The CARD selection specifies the optional PCMCIA card as CC1 and the optional Expanded Flash ROM as CC2. The Memory selection specifies the optional Expanded Flash ROM as CC1 and the optional PCMCIA card as CC2.

1.Step the cursor to the desired selection using the LINE key.

2.Once the cursor is positioned over the desired selection, press the FEED key to accept the selection and advance the display.

This selection allows you to copy TrueType fonts from the PCMCIA Memory card installed in the Memory Card slot on the rear of the printer to the optional Flash ROM.

1.Use the LINE key to step the cursor to desired setting. If Yes is selected, the printer will enter the Card Copy mode. If No is selected, the display will advance to the Card to Memory SATO Font Copy mode.

2.Confirm your selection by stepping the cursor to the Yes selection. If you select No, the display will return to the previous selection.

3.Press the FEED key to accept the selection. If Yes was selected the copy process will start.

Page 3-16

PN 9001105 Rev. A

SATO M-84PRO

Page 41 Page 43
Image 42
Page 41 Page 43
Contents 84PRO Page Table of Contents Interface Specifications Section Printer Overview IntroductionGeneral Printer Specifications Specification84PRO All Models Character Fonts Matrix FontsBAR Codes BAR CodePower PhysicalOptional Accessories Accessories and OptionsThis page left intentionally blank Section Installation Unpacking and Parts Identification Setting UP the Printer LCD Loading Labels and Tags Installation Route Labels Under Guide Head Latch Loading the Ribbon Tape Operator Panel Feed On LineLine DSWRear Panel Sensors Head Open SensorLabel Indexing Sensor This page left intentionally blank RS232 TRANSMIT/RECEIVE Setting Printer DIP Switch ConfigurationDIP Switch Panels OFFPrinter SET UP DSW2 OFFHex Dump Selection DSW2-4.Selects Hex Dump mode see DSW3 Setting DSW3 OFFDSW3-6 DSW3-7 Software Default Settings Default SettingsSwitch Selections Default CompletedPotentiometer Adjustments PitchBackfeed Offset Display PrintMode KEY Sequence Initial Display LCD Panel Printer ConfigurationNormal Mode Initializing Online QTY000000Print Darkness Print SpeedPitch Offset + 00mm Initializing Advanced Mode Advanced ModeCancel Print JOB YES no Completed Zero Slash YES no Auto OnlinePrint Offset SET Calendar YES noCalendar Ignore CR/LF YES noCard Mode Character Pitch Prop Fixed Advanced ModeCopy Start YES no Truetype Fontcopy Completed Card COPY/FORMAT Xxxxxxx Error CARD-MEMORY Copy Copying MEMORY-CARDCOPY Program Y/N Service Mode Initializing Advanced Mode Service Mode GAP InputGAP Input EYE Input Auto Online Feed YES no Feed on Error Reprint W/FEED YES no EXT PIN 9 Select MODE1 MODE2 Euro CodeLabel RE-DETECT Enable Disable Advanced Mode Counters Mode Counters ModeTest Print Mode Counters HD CUT Life Head Counter Head Count Clear YES noInitializing Default Setting YES no Default Setting ModeTest Print Mode Configuration Test Print SizeDownload User Defined Protocol Codes Default Setting CompletedClear NON-STANDARD Protocol Initializing User Download Press the Line KEYHEX Dump Mode User Download WaitingInitializing Online Adjusting the Print Quality Print DarknessCleaning the Print HEAD, Platen and Rollers Print SpeedCleaning the Label Edge Sensors Cleaning the Platen and RollersReplacing the Print Head Supplies needed Flat blade screwdriverDo not remove the two outside Screws painted red on either This page left intentionally blank Initial Checklist Using the IEEE1284 Parallel InterfaceUsing the RS232C Serial Interface TroubleshootingUsing the Universal Serial BUS USB Interface Using the LAN Ethernet InterfaceChecking the Network Connection and Cabling Troubleshooting Error Signals LED LCD Message Audible Error Possible Causes Beep ConditionSection Interface Specifications Interface TypesReceive Buffer Single JOB BufferMulti JOB Buffer IEEE1284 Parallel Interface Electrical Specifications Data StreamsGeneral Specifications RS232 Serial InterfacePIN Assignments Cable Requirements READY/BUSY Flow Control ON/X-OFF Flow ControlUniversal Serial BUS USB Interface Local Area Network LAN Optional InterfaceBI-DIRECTIONAL Communications Enquire ENQ Cancel canENQUIRE/ACK/NAK Print JOBPrint Stop DLE Print Start DC1Installation Error HandlingPcmcia Memory Cards Description Error Description Indication Remedy PLUG-IN Interface ModulesOperator Setup CutterGeneral Operation Label Dispense Option Label Rewinder Removing and Unwinding the RollReal Time Clock

M-84PRO specifications

The SATO M-84PRO is a high-performance thermal printer designed for industrial applications, known for its reliability and efficiency in various labeling tasks. This printer is a part of SATO's esteemed M-84 series, which combines advanced technology with user-friendly design to meet the demands of large-scale operations.

One of the standout features of the SATO M-84PRO is its fast printing speed, capable of producing labels at a rate of up to 8 inches per second. This rapid output makes it an ideal choice for environments that require quick turnaround times, such as warehouses, manufacturing lines, and logistics centers.

The M-84PRO employs a direct thermal or thermal transfer printing method, allowing for outstanding print quality. With a maximum print resolution of 305 dpi, it ensures crisp and clear text and graphics, which is essential for barcodes and detailed images on labels. The printer supports a wide range of media types, accommodating label widths from 0.75 inches to 4.1 inches, making it versatile for various labeling needs.

Equipped with SATO's unique Smart Technology, the M-84PRO offers enhanced control over label production. This technology includes automatic label detection and calibration, which minimizes setup time and reduces waste, thus improving overall operational efficiency. Additionally, the printer is compatible with various programming languages, including SAPscript and ZPL, ensuring easy integration into existing systems.

Durability is another hallmark of the M-84PRO. Built with robust materials, it can withstand the rigors of industrial environments, ensuring long-term performance. The printer also features a compact design, which is perfect for tight workspaces, while still being rugged enough to handle demanding tasks.

Moreover, the SATO M-84PRO boasts extensive connectivity options, including USB, Ethernet, and serial interfaces, which allow for seamless integration into any operational workflow. It also supports various operating systems, providing flexibility and ease of use when working with different platforms.

The printer’s user-friendly interface, highlighted by an LCD panel and multi-functional buttons, facilitates easy navigation and operation. Maintenance is also simplified, thanks to modular components that allow for quick and easy replacement of parts when necessary.

In summary, the SATO M-84PRO stands out as a leading choice in the thermal printer market, combining high-speed printing, excellent durability, and versatile labeling capabilities. Its advanced technologies and features make it suitable for a variety of demanding applications, ensuring that businesses can rely on it for their labeling needs.
Top Page Image Contents