SATO M-84PRO manual General Printer Specifications

Section 1: Overview

GENERAL PRINTER SPECIFICATIONS

SPECIFICATION	M-84PRO-2		M-84PRO-3	M-84PRO-6
PRINT
Method		Direct or Thermal Transfer
Speed (User Selectable)	2 to 10 ips		2 to 8 ips	2 to 6 ips
	50 to 250 mm/s		50 to 200 mm/s	50 to 150 mm/s
Print Module (Dot Size)	.0049 in.		.0033 in.	0017 in.
	.125 mm		.083 mm	.081 mm
Resolution	203 dpi		305 dpi	609 dpi
	8 d/mm		12 d/mm	24 d/mm
Maximum Print Width			4.1 in.
			104 mm
Maximum Print Length	49.2 in.		32.8 in.	14.0 in.
	1249 mm		835 mm	356 mm
MEDIA
Minimum Width			.87 in.
			22 mm
Minimum Length			0.24 in. (6 mm)
Continuous
Tear-Off			0.63 in. (16 mm)
Cutter			1.18 in. (30 mm)
Dispense			1.18 in. (30 mm)
Maximum Width			5.0 in.
			125 mm
Type		Roll or Fan-Fold Die Cut Labels
			Thermally Sensitive
Maximum Caliper			0.008 in.
			0.21 mm
Roll OD (max) Face-In			8.6 in.
			220 mm
Core ID (min)			3 in
			76.2 mm
SENSING
See-Thru			Movable
Reflective Eye-Mark			Movable
Continuous Form			Sensor Not Used
RIBBON
Maximum Width			4.4 in. (111 mm)
Length (max)			1475 ft. (450 m)
Thickness		4.5 micron, Wound Face-In

Page 1-2 PN 9001105 Rev. A SATO M-84PRO