SATO CX200 manual Controls, Indicators and Connections, Device Name Primary Function USE

6

SECTION 1 - GENERAL INFORMATION

1-5 Controls, Indicators and Connections

The following table summarizes the functions of the various printer controls, indicators, and connections.

DEVICE NAME	PRIMARY FUNCTION	USE
		PRESS - to advance media
		PRESS while pressing READY
FEED button	Advances print media	indicator-to print test label
		PRESS to pause printing during
		batch mode operation
		GREEN - Printer ready for data
READY indicator	Shows print status	OFF - Printer busy, or Off-Line
		RED - Printer needs attention
ON-OFF line	Places printer in On-	PRESS to switch to/from Off-Line
	Line or Off-Line mode	or to reset the printer
Power input	Connects to power	Connect to power supply pro-
	supply	vided with printer
		DB9 female connector for connec-
Serial port	Data input	tion to host controller, RS232
		interface
Parallel port	Data input	Centronics compatible connector
		for connection to host controller
Print head	Unlocks print head	Push both releases toward rear of
release		printer to release print head
Media cover	Protects print media	Lift to open
	mechanism	Push outward at hinge to remove

Rev B

SATO SERVICE MANUAL

CX Series Printers