Star Micronics 347F user manual Position of the adjust lever SP347

ENGLISH

A:One Sheet of paper (standard position)

B:Copy paper

Adjust lever

Fig. 2-6 Position of the adjust lever

(SP347)

Paper guide shaft

Paper	2.25 inch	Paper
guide	3 inch	guide
	3.35 inch

Fig. 2-8 Roll paper guide (SP347)

Auto cutter

Fig. 2-9 Raise the auto cutter (SP347)

Roll paper holders

Lock lever

Paper guides	Paper holder
	mount notch
	for 3-inch
	paper
For 2.25-inch
paper
Paper holder	For 2.25-inch
mount notch
	paper
for 3-inch
paper

Fig. 2-7 Mounting the roll paper

holders (SP347)

5Set the left and right paper guides. Leave a 0.5 mm gap between the paper guide and the edge of the paper and fix the lock lever.

∙When you insert the stop ring that corresponds to the groove of the paper guide shaft shown in Fig. 2- 8, that will be the position when you set the paper guide.

6Lift up the auto cutter and put it in a vertical position, as shown in Fig. 2- 9.

– 8 –