TRENDnet TPL310AP manual

Page 15

9. Configure the LAN Interface Settings of the TPL-310AP. Click Next.

IP Address: The assigned IP address should match the network IP address range of your network. This IP address should not be used by any other devices on your network.

Subnet Mask: The assigned Subnet Mask should match the network Subnet Mask of your network. In most cases, the default Subnet Mask setting (255.255.255.0) should be fine.

DHCP: Setting DHCP to Client will set your device to obtain an IP address automatically from your DHCP server (router). If Disabled, you will need to manually configure the IP address settings.

Note: It is recommended to manually configure the LAN Interface Settings (IP Address and Subnet Mask) in case you need access the device in the future. Please write down the IP address settings as- signed for future reference.

Image 15

Contents Page Safety RoHS Table of Contents Overlapping Powerline Networks Product Overview Expanding an Existing Powerline Network Expanding a Wireless NetworkExpanding a Wired Network Technical Features PowerlineWireless Package Contents System RequirementsMemory LEDs & Buttons Device LabelLED TRENDnet310 Defaults SettingsWireless AP Setting IP Address / Subnet Mask 192.168.10.100 Top PanelWireless Access Point Initial Setup Page Page Page Page Page Menu Items Wireless Access Point Web Management InterfaceDefault Configuration Settings Wireless AP SettingStatus Basic Settings Wireless Apply/Reset ChangesControl Sideband AP+WDS Access Point + Wireless Distribution System AllowsDescription of Modes Network TypeMultiple Ssid Advanced Settings Active Wireless Client TableSecurity WEP Security 802.1x AuthenticationWPA/WPA2 Security WPA Mixed WPA / WPA2 Cipher SuitePre-Shared Key Format Comment Access ControlWireless Access Control Current Access ControlWDS Settings Items Information MAC AddressCurrent WDS AP List Items Information Mesh ID Mesh SettingsSite Survey 11 WPS Time Items Information Enable Wireless ScheduleSchedule Days Sun, Mon, Tue, Wed, Thu, Fri, Sat CheckClone MAC Address TCP/IP SettingsItems Information IP Address 802.1d Spanning TreeTypes of Logging Enable LogEnable Remote Log LogUpgrade Firmware Save/Reload SettingsStatistics Password System TimeLogout Powerline Create a powerline network and extend you wireless network Page Changing the Network Name/Security Key using the Sync Button Securing your Powerline NetworkPage Overlapping Powerline Networks Page Software Installation Powerline Configuration UtilityPage Page Confirm Installation window, click Next Upgrade Firmware Using the UtilityPage Powerline TroubleshootingWireless Installation Considerations Specifications Antenna Access Point ModesOutput Power Frequency BandLimited Warranty PWP05202009v2