TRENDnet TPL310AP Description of Modes, AP+WDS Access Point + Wireless Distribution System Allows

	To select a band for this device to match 802.11b, 802.11g,
	802.11n, 802.11b/g, 802.11g/n or 802.11b/g/n. optional
Band	parameters:
	2.4GHz(B),2.4GHz(G),2.4GHz(N),2.4GHz(B+G),2.4GHz(G+N),
	2.4GHz(B+G+N)
	Configure this device as AP, Client, WDS or AP+WDS ，
	AP+MESH,MESH. If you set this device as AP or AP+WDS mode, the
	button is available for you to set up four SSID for
	this wireless network. Click on this button to do more
	configurations.
	Description of Modes
	AP (Access Point): Allows wireless clients or devices to establish
	connectivity.
	Client: Allows the device to connect to another wireless access
	point and establish connectivity through the network port. Also
	known as wireless adapter mode.
Mode	WDS (Wireless Distribution System): Allows the device to establish
	a WDS wireless bridge to other WDS supported wireless access
	points.
	AP+WDS (Access Point + Wireless Distribution System): Allows
	wireless clients or devices to establish connectivity and allows the
	device to establish a WDS wireless bridge to other WDS supported
	wireless access points simultaneously.
	Mesh: Allows the device to establish a wireless mesh network with
	other mesh supported wireless access points.
	AP+Mesh (Access Point + Mesh): Allows wireless clients or devices
	to establish connectivity and allows the device to establish a
	wireless mesh network with other mesh supported wireless access
	points simultaneously.
	When you configure this device in AP Client mode, this drop-down
	list allows users to change the network type into infrastructure
	mode or ad-hoc mode.
Network Type	Ad-Hoc mode: connects two computers directly without the use of
	a router or AP. It is also know as a peer-to-peer network.
	Infrastructure Mode: the wireless network contains at least one
	wireless client and one wireless AP or router. This client connects to
	Internet or intranet by communicating with this wireless AP.
SSID	Service set identifier (SSID) for the name of the wireless network.
Channel Width	Select to use 20MHz or 40MHz as the wireless channel frequency.
	If you have selected the channel width of 40MHz for this AP, you
Control Sideband	can control this AP to use the frequency for a deflection of “Upper”
	or “Lower.”