TRENDnet TPL310AP manual Multiple Ssid

Channel Number	Select a channel for the wireless network of this device.
	If you enable "Broadcast SSID", every wireless station located within
	the coverage of this wireless AP can discover this wireless AP easily.
Broadcast SSID	If you are building a public wireless network, enabling this feature is
	recommended. Disabling "Broadcast SSID" can provide better
	security.
	This will enhance the data transfer performance of multimedia
WMM	contents when they’re being transferred over wireless network.
	WMM is not available in 11n mode.
	The transmission rate of data packets of this wireless AP. The
Data Rate	wireless AP will use the highest possible selected transmission rate
	to transmit the data packets if set to Auto.
	Click "Show Active Clients" button, then an "Active Wireless Client
Associated Clients	Table" pops up. You can see the status of all active wireless stations
	that are connecting to the access point.
	Mark the checkbox to clone the MAC address of the device. This
Enable MAC clone	function is only available when you set this AP as Client mode. You
	can also manually set the MAC address in LAN setting.
Enable Universal	Mark	this	checkbox to	enable Universal Repeater Mode which
	allows	the	TPL-310AP	to repeat the signal of another wireless
Repeater Mode
	access point. Available in AP, Client, or AP+WDS modes only.
SSID of Extended	When enabling the Universal Repeater Mode, specify an SSID for
Interface	the extended interface.

*Please click on the Apply Changes button or the Reset button at the bottom to save/reset the configuration.

3.4.3 Multiple SSID

This is the window that pops up after clicking the button.

Select one of the AP, and then click the button “Show”, “Active Wireless Client Table – AP1” windows pops up.