Xantrex Technology PH1800 manual 1Replacing Ground Fault Protection Fuse

Page 47

Ground Fault Protection

4.Replace the panel on the top of the inverter and tighten all five screws securely.

BEFORE REMOVING INVERTER COVER: Check to ensure the AC Indicator LED is NOT illuminated and that there are absolutely no sources of power connected to the PowerHub.

Remove the 5 #6-32

Phillips screws on the top of the inverter. Lift off the

panel to expose the terminals.

PV Ground Fault

Protection Fuse

AC Indicator LED

Figure 3-1Replacing Ground Fault Protection Fuse

975-0288-01-01

3–11

Image 47
Contents PowerHub Page Operator’s Guide PowerHubDate and Revision Audience About This GuidePurpose ScopeRelated Information Conventions UsedAbbreviations and Acronyms Important Safety Instructions Figure i Basic Safety Precautions When Working With Batteries FCC/ICES 003 Information to the User Precautions for Using Rechargeable AppliancesTo Power Down the PowerHub Power Down ProcedureIf hardwired...... To Power Down the PowerHub Contents Specifications TroubleshootingFigures Xiv Tables Page For this topic See IntroductionPrinciples of Inverter Operation IntroductionPrimary AC source Basic Functions of the PowerHub2PowerHub 1800 Features Inverter FeaturesThree-Stage Charging Process on Battery Charger FeaturesVoltage 12.5 Vdc Operation Contains information on operating the PowerHubInverter Control Panel 8.8LED User Controls and DisplayStatus LEDs Operating Mode LEDsAC LED Selecting Charger SettingsBasic Operation Power On and Off3Input Displays Changing the Display4Output Displays AC is not available Changing Charging SettingsConnecting AC Loads 6Connecting AC Loads Loads that should not be used with the PowerHub Typical Loads that might be used with the PowerHubLoads That Might Not Work Well With the PowerHub Troubleshooting How to Troubleshoot the PowerHub Error Codes Troubleshooting Error Codes for Troubleshooting the PowerHub 2Possible Problems if Utility Power is Not Available If Utility Power is not AvailableError code E02 3Possible Problems if Utility Power is Available If Utility Power is AvailablePossible Problem Loads Rechargeable Devices Replacing the Ground Fault Protection Fuse Ground Fault Protection1Replacing Ground Fault Protection Fuse Page Specifications Table A-1Electrical Specifications for the Inverter Electrical SpecificationsBattery Charger Specifications Physical SpecificationsFigure A-1Three-Stage Charging Process Amp Charging Profile Charging ProfilesTable A-610-amp Charging Profile Index IX-2 975-0288-01-01 Warranty Warranty and Return InformationProduct DisclaimerExclusions Return Material Authorization PolicyReturn Procedure Out of Warranty Service Purchased From Purchase Date Information About Your SystemWA-6 Page Xantrex Technology Inc