Summit HL-630 OPC Lexmark W812, Minolta PageWorks, Fuji-Xerox XP-26 Lexmark Cartridge 14K0050

Lexmark W812

(Fuji-Xerox XP-26)

Lexmark Cartridge Part # 14K0050

OEM Stated Yield: 12,000

These cartridges use a chip, but it is not the “Killer type” These chips monitor the “Toner Low” as well as tell the machine the brand of cartridge it is. So far we have seen Lexmark, Epson, and IBM machines using these cartridges. The chips for each brand are different. Initial tests show that the chip can be re- used for at least one cycle with no issues. Testing is still ongoing.

Minolta PageWorks 8

Xerox Drum Cartridge Part # 106R42

OEM Stated Yield: 6,000

Sharp FO-4400/4450/DC5500 Toner Cartridge Part # FO- 55ND

There are many versions of PW8 drum cartridges, but only those used in the WorkCentre pro 555/575 need to be reset. The reset procedure is as follows:

Press the “MENU” button, and then the numbers “5”, “2”, “0”, and “4”

Press “1”

Press “ENTER”.

Press “STOP”

To replace the drum cartridge (click here)

(We do not have this particular machine so I do not know exactly what that last line means. This information is straight from Xerox.)

Sharp FO-55ND Toner Cartridge: These cartridges have a chip that must be replaced each cycle. New replacement chips are available

Minolta PageWorks 1350

Minolta Drum Cartridge Part # 1710568-001

OEM Stated Yield: 20,000

There are a few different reset procedures for the drum units, all dependant on the machine. All are done either by the Printer menu, or through the printer driver:

Minolta PageWorks 1350W:

Hold down the START/STOP and the INFORMATION buttons while turning on the printer. Hold them until the Ready (green) and Error (red) lights turn on.

Epson EPL-6200:

Hold down the START/STOP and the INFORMATION buttons while turning on the printer. Hold them until the Ready (green) and Error (red) lights turn on.

Epson EPL-6200L Windows:

Double click on the printers/faxes icon. Right click the icon for this printer. Click on the PRINTER SETTINGS button on the printer drivers OPTIONAL SETTINGS menu. Then click on the OPC LEVEL CLEAR or RESET OPC LEVEL button. Click on OK, the printer is reset.

Epson EPL-6200L Macintosh:

Access the REMOTE CONTROL PANEL utility, and then click SETTING. Click on the OPC LEVEL CLEAR, PHOTOCONDUCTOR LIFE RESET or RESET OPC LEVEL button. Click on OK, the printer is reset.

22