Summit HL-630 OPC Sharp AR-5015 Toner Cartridge, Sharp AR-163 OPC, Sharp AR-5316 Toner Cartridge

Sharp Cartridge Part # AR-201ND

OEM Stated Yield: 30,000

The developer is rated for 30,000 pages. The default setting on the machine is to keep running even after the 30K pages. That default setting can be set by the dealer to stop at 30K pages. It is considered a dealer option.

To enter the simulation mode, press the "CLEAR KEY", "INTERRUPT KEY", "0" KEY", "INTERRUPT KEY", "MAIN CODE" "START KEY", "SUB CODE" "START KEY",

"Main code" for clearing the developer = 42 "SUB CODE" for clearing the developer = 1 The developer count is now cleared.

To exit the simulation mode press the "CLEAR ALL KEY"

Turn the machine off and on.

Sharp AR-5015 Toner Cartridge

Sharp Cartridge Part # AR-016T

OEM Stated Yield: 16,000

The toner cartridges in these machines have a chip that must be replaced each cycle. The chip is located on the gear end of the cartridge. Replacement toner and chips are available.

Sharp AR-163 OPC

Sharp Cartridge Part # AR-201DR

OEM Stated Yield: 30,000

Inside the drum cover, there is a gear with a “Flag” on it. Remove the gear and place it so the flag is at the 12:00 position. This flag when the cartridge is installed, will turn down, and engage a switch in the machine. This tells the machine there is a new drum. If the drum unit has never been rebuilt, this flag gear is not there. It can be ordered from Sharp, but there is also a reset that can be done through the menu

To enter the simulation mode, press the "CLEAR KEY", "INTERRUPT KEY", "0" KEY", "INTERRUPT KEY", "MAIN CODE" "START KEY", "SUB CODE" "START KEY",

"Main code" for clearing the developer = 24 "SUB CODE" for clearing the developer = 7 The drum count is now cleared.

To exit the simulation mode press the "CLEAR ALL KEY" Turn the machine off and on.

Sharp AR-5316 Toner Cartridge

Sharp Cartridge Part # AR-016TD

OEM Stated Yield: 9,000

The toner cartridges in these machines have a chip that must be replaced each cycle. The chip is located in a pocket in the cartridge. It can be held in place by either 2 clips, 1 screw, or 2 screws. Replacement toner and chips are available.

Sharp JX-9200 OPC

The Sharp JX-9200 engine has many variations. The known reset procedures are listed by machine model #, and cartridge part #.

Sharp FO-26/28/29/AL-80

Sharp Part # FO-26DR/28DR/29DR/AL-80DR

37