Summit HL-630 OPC manual Brother HL-3260N OPC, Brother HL-5150 OPC, Brother HL-5200 OPC

Brother HL-3260N OPC

Brother Cartridge

Part #DR-1200

OEM Stated Yield: 60,000

The HL-3260 is Brothers first high speed printer. The drum cartridge comes with three RED sheets and two pieces of tape installed on the cartridge.

There is a possibility that there is developer inside the drum cartridge. Removal of these is what seems to reset the counter, or there may not be a counter that has to be reset. These cartridges are still being investigated.

OEM Stated Yield: 25,000

Laser Printers: make sure the machine is turned on and the Drum LED is blinking. Open the front cover. Press and hold the GO button for 4 seconds until all the LEDs light up. Once all the LEDs are lit, release the GO button. Close the front cover. The counter is Reset!

Fax Machines: Open the front cover. Press the CLEAR/BACK button. Press 1, when the display shows Accepted, close the front cover. The counter is reset!

Brother HL-5150 OPC

Brother Cartridge

Part #DR-510 (DR-3000)

OEM Stated Yield: 20,000

Laser Printers: After replacing the drum unit, keep the front cover open (make sure the power is on). Press and hold the "GO" button until all four LED’s are lit. Once the four LED’s light up, close the front cover. Make sure the drum LED is off. The counter is reset!

Fax Machines: Open the front cover. Press the CLEAR/BACK button. Press 1, when the display shows Accepted, close the front cover. The counter is reset!

Brother HL-5200 OPC

Brother Cartridge

Part #DR-520 (DR-3100)

Brother HL-6050 Toner

Brother Cartridge

Part #TN-670 (TN-4100)

OEM Stated Yield: 7,500

These cartridges have a gear-driven reset lever that must be reset. To Reset the cartridge, set the black reset gear as shown in the picture

Brother HL-6050 OPC

Brother Cartridge

Part #DR-600 (DR-4000)

OEM Stated Yield: 20,000

After replacing the drum unit, keep the front cover open (make sure the power is on). Press and hold the "GO" button for four seconds, the display will then show "DRUM CLEAR". Close the front cover. The counter is reset!

3