IBM ARTIC960RxD manual T1 RJ-48, E1 RJ-48 T1 DB-15, and E1 DB-15, E1 BNC grounded and ungrounded

T1 RJ-48, E1 RJ-48,			T1 DB-15, and E1 DB-15
These		cable	assemblies		consist of		a 36-pin male connector at one end of a
cable		that	branches into four individual cables,					each	of which provides access
to	one	of	four	independent ports.
E1 BNC (grounded and ungrounded)
These		cable	assemblies		split	first	to four cables. Then, each of the four cables
splits		into two, resulting in eight					connectors. There is a transmit (Tx) connector
and	a	receive		(Rx) connector		for	each of the	four	ports.

The following table lists the cable name, FRU number, and feature code (FC) number for each optional cable.

Table		6-1. FRU and Feature				Code (FC)	Numbers for Optional		Cables
								Numbers
Cable	Name							FRU		FC
T1	RJ-48							87H3518		2709
E1	RJ-48							87H3515		2710
T1	DB-15		100	Ohm	Balanced			87H3793		2871
T1	DB-15		100	Ohm	Extension			54F0740		2872
E1	DB-15		120	Ohm	Balanced			87H3791		2873
E1	DB-15		120	Ohm	Extension			05F2045		2874
E1	DB-15		120	Ohm	Balanced	Isolated		47L8826		---
E1	BNC	75	Ohm	Unbalanced/Grounded				87H3521		2875
E1	BNC	75	Ohm	Unbalanced/Ungrounded				87H3629		2876
4-Drop		H.100						08L1215		2877
4-Drop		SCBus						08L1217		2878
4-Drop		H.100/SCBus			Converter			08L1219		2879

Surge protection cables are also available in two versions: RJ-48 (FRU 87H3651) and BNC (FRU 87H3656).

6-2Installation and User's Guide