IBM ARTIC960RxD manual Version Or later, For, Installation, Rte, Dt/Aix

IBM ARTIC960

Run

Time

Enviornment

(RTE)

Version 1.3

(or later)

Support

for

AIX

Installation

The

IBM

ARTIC960

Run

Time

Enviornment

(RTE) Version 1.3 (or later)

Support

for

AIX must be installed on

your system for the IBM ARTIC960RxD Quad DTA to

function. This

software

is

provided

on the CD-ROM that

came

with

this

product. If

your

system

is

currently

on,

you

may install the device drivers

now. If your system is

currently

off,

you

may

install

the

device drivers

after installing

the

adapters.

Note:

If

you

are

using

the RxD with the IBM DirectTalk for AIX (DT/AIX) software,

the IBM ARTIC960 Run Time

Environment

(RTE)

software

(including

the

device

drivers

and

RxD

support)

is installed

automatically

as

part

of the

DirectTalk for AIX

install process.

Refer

to

the

DT/AIX

installation

guide

for

further

information.

To install the IBM ARTIC960 RTE Version 1.3 Support for AIX:

1.Turn on your system unit.

2.Log in rootas .

3.	Insert	the CD-ROM into the CD-ROM drive.
4.	At the	command line,smitypety devinst and pressEnter .

5.PressF4 .

6.Select the CD-ROM option and Enterpress.

Note:

The

installation

will

start.

TheOK

messagewilldisplay

when

the

installation

is

completed.

7. If

you

are

ready

to

install the

adapter

at

this

time:

a. Typeshutdown -F

and

pressEnter

to

shutdown

your

system.

b. Skip

to “Jumper

Installation

Information”

on

page 1-3.

8. If

you

have

already

installed

the

adapter

cards:

a. Typeshutdown -Fr and

pressEnter

to

reboot

your

system.

b. Log

in

againroot as. The

adapters

should now be configured and the

system

should

be

ready for

use.

1-2Installation and User's Guide