IBM ARTIC960RxD manual E1 BNC Connector Ungrounded

E1 BNC Connector (Ungrounded)

The following illustration shows a BNC connector. Table 6-6 lists the pin

assignments for the E1 BNC electrical interface. The “x” in the signal name is the number of the port. The ID is Ch for the E1 ungrounded BNC.

Table 6-6. E1	BNC	Connector		(Ungrounded)		Pin Assignments
					36-pin	Connector				BNC
Signal Name	I/O		0		1		2	3	Connector
TX1_x	O		33		29		23	19	TX	inner
									conductor
RX1_x	I		35		31		25	21	RX	inner
									conductor
RX2_x	I		36		32		26	22	RX	outer
									conductor
FGND,	---				Housing, 20, 24, 30,			34	TX	outer
TX2_x									conductor

6-8Installation and User's Guide