IBM ARTIC960RxD manual Quad T1/E1, Before You Begin

Page 28

Reinstalling		the	Quad T1/E1	DTA
The	following		instructions	assume	that	you have the base adapter out of the system
unit	and	are	ready to	install	the	mezzanine card.

Before You Begin

Verify that the jumper on the base adapter is set properly (see page 1-3).

1.Align the connector on the mezzanine card with the PMC connector on the base adapter.

Attention:
When	the base	adapter	and the mezzanine card are	properly aligned,	the top	of
the	voltage keying pin on		the base adapter fits into	the voltage key	opening	on
the	mezzanine	card.

2. Firmly press the mezzanine card and the base adapter connectors together.

3. Install the four mounting screws; then tighten the screws.

4. Follow the procedure “Jumper Installation Information” on page 1-3.

3-2Installation and User's Guide

Image 28

Contents IBM 1999 Local LawContents IEC IndexSafety Information Vi Installation and Users Guide Handling Static Sensitive Devices Viii Installation and Users Guide This Book ISORelated Information TrademarksInstallation and Users Guide Installation Hardware RequirementsIBM DTAInstallation Version Or laterFor RTEJumper Installation Information Before installing this adapter, set jumper JP01 as followsInstalling Quad Digital Trunk PCI AdapterDigital 100, 4-Drop CablingPCI Adapter Internal Cabling Cable SC-Bus Converter Connector 100, 4-Drop Cable WithConnecting Telecommunications Cables Diagnostics TheProgramUnavailable Part Numbers Product DescriptionPCI Features and Function IBM ARTIC960RxD PCI Adapter-Base AdapterROM PLXQuad T1/E1 DTA-Mezzanine Card VlsiComponent Locations Specifications Optional CablesPublications AIX6Installation and Users Guide Reinstalling the Quad T1/E1 DTA T1/E1Quad T1/E1 Before You BeginInstalling DriverSystem Check System Pre-RequisitesPrompt Then Install Images Workstation InstallHigher No Prerequisite Driver devices.artic96ð Install Device Drivers on the SP Nodes Problem Determination Procedures TroubleshootingDiagnostic Testing Diagnostic Wrap Cables and Connectors T1 RJ-48, E1 RJ-48 T1 DB-15, and E1 DB-15 E1 BNC grounded and ungroundedPort Speeds T1/E1 DTAIndividual Signals For All Ports Connect Quad T1/E1 RJ-48 Jack Connector DB-15 Connector E1 BNC Connector Grounded BNCE1 BNC Connector Ungrounded Statement European Union EU StatementSafety Requirements International Electrotechnical Commission IEC StatementAvis Ministère desVcci Statement Electromagnetic Interference EMI Statement TaiwanRadio Protection for Germany FICCanada Telecommunications Statement New Zealand Telecommunications Statement Norway and Sweden Telecommunications StatementBNC IndexEDO 2Installation and Users Guide Readers Comments Wed Like to Hear From You Business Reply Mail Page IBM