Fujitsu MAV2073RC, MAV2036RC manual Interface connector SAS plug signal allocationCN1

Installation Requirements

Table 4.2 Interface connector (SAS plug) signal allocation:CN1

Pin No.	Signal	Description
S1	GND	GND for SAS Primary Port
S2	RP+	SAS Primary Port Receive(positive) signal
S3	RP-	SAS Primary Port Receive(negative) signal
S4	GND	GND for SAS Primary Port
S5	TP-	SAS Primary Port Transmit(negative) signal
S6	TP+	SAS Primary Port Transmit(positive) signal
S7	GND	GND for SAS Primary Port
S8 Note1	GND	GND for SAS Secondary Port
S9 Note1	Reserved (not used)	Not used
S10 Note1	Reserved (not used)	Not used
S11 Note1	GND	GND for SAS Secondary Port
S12 Note1	Reserved (not used)	Not used
S13 Note1	Reserved (not used)	Not used
S14 Note1	GND	GND for SAS Secondary Port
P1 Note2	Reserved (not used)	Not used
P2 Note2	Reserved (not used)	Not used
P3 Note2	Reserved (not used)	Not used
P4	GND	GROUND
P5	GND	GROUND
P6	GND	GROUND
P7	+5V-Charge	Pre-charge pin for +5V
P8	+5V	+5V power supply input
P9	+5V	+5V power supply input
P10	GND	GROUND
P11	READY LED	READY LED output
P12	GND	GROUND
P13	+12V-Charge	Pre-charge pin for +12V
P14	+12V	+12V power supply input
P15	+12V	+12V power supply input

Note 1) S8 - S14 are SAS Secondary Port signals, and not used on MAV2073RC and MAV2036RC.

Note 2) P1 to P3 are 3.3V power supply input and pre-charge signals, and not used on MAV2073RC and MAV2036RC.

4-10 C141-E219