Fujitsu manual Specifications, Function specifications, MAV2073RC MAV2036RC, 32/34 Meeprml

Specifications

2.1.2Function specifications

Table 2.2 shows the function specifications of the HDD.

		Table 2.2	Function specifications
Item			Specification
			MAV2073RC	MAV2036RC
Formatted capacity/device (*1)			73.5 GB (*2)	36.7 GB (*2)
Number of disks			2	1
Number of heads			4	2
Number of rotations min-1(rpm)			10,025 ± 0.2%
Average latency time			2.99 msec
	Track to Track		0.2 ms/0.4 ms
Seek time (*3)	Average		4.0 ms/4.5 ms
(Read/Write)
	Full stroke		8.0 ms/9.0 ms
Start/stop time	Start time		15 s typ. (30 s max.)
(*4)	Stop time		15 s typ.
Recording mode			32/34 MEEPRML
	Height:		15.0 mm max
External	Width:		69.85+/-0.25 mm
dimensions
	Depth:		100.45 mm max
Weight (max)			0.22 kg
Power consumption (*5)			4.5 W
Interface	SAS		Cable length: 8 m max
Areal density			70.2 Gbit/inch2
Data transfer	Disk drive		56.4 to 94.1 MB/s
rate (*6)	SAS		1.5Gbps, 3Gbps
Logical data block length			512 to 528 byte (Fixed length) (*7)
		SAS (T10/1562D Rev. 05), SAS1.1 (T10/1601D Rev. 07),
Command specification		SAM-3 (T10/1561D Rev. 14), SAM-2 (T10/1157D Rev. 24),
		SPC-2 (T10/1236D Rev. 20), SBC (T10/996D Rev. 8c)
Data buffer			8 MB FIFO ring buffer (*8)
Acoustic noise (Ready)			2.9 Bels typ.

(*1) The formatted capacity can be changed by changing the logical block length and using spare sector space. See Chapter 3 for the further information. The formatted capacity listed in the table is an estimate for 512 bytes per sector.

(*2) 1GB=1,000,000,000 bytes

2-2 C141-E219