IBM DCS9550 1S1 manual 2AC Power Supply/Cooling Module Handle in Open Position

Installation

Important Install the Power Supply/Cooling module (PSU 0) in the bay on the right side (Rear Bay 1) of the enclosure in an “upside down” orientation. If necessary, reorient the power cord clip so that the power cord can be properly retained.

3Cam the module home by manually closing the PSU handle (Figure 2–4). You should hear a click as the handle latches engage.

4Connect the power supply cord to the power source and switch the power supply ON.

Figure 2–2AC Power Supply/Cooling Module - Handle in Open Position

Figure 2–3Installing an AC Power Supply Cooling Module (1)

IBM System Storage DCS9550 1S1 Storage Expansion Unit Installation, Service, and User Guide 19