Cisco Systems IE 3000 warranty Installing the Switch, Other Management Options

Page 11

Cisco IE 3000 Switch Getting Started Guide

Using the Switch Console Port:

Follow these steps:

1.Connect the supplied RJ-45-to-DB-9 adapter cable (console cable) to the standard 9-pin serial port on the PC. Connect the other end of the cable to the console port on the switch.

2.Start a terminal-emulation program on the PC.

3.Configure the PC terminal emulation software for 9600 bits per second, 8 data bits, no parity, 1 stop bit, and no flow control.

Use the CLI to enter commands to configure the switch. See the software configuration guide and the command reference for more information.

Other Management Options

You can use Simple Network Management Protocol (SNMP) management applications such as CiscoWorks Small Network Management Solution (SNMS) and HP OpenView to configure and manage the switch. You also can manage it from an SNMP-compatible workstation that is running platforms such as HP OpenView or SunNet Manager.

See the “Accessing Online Help” section on page 27 for a list of supporting documents.

Installing the Switch

These sections explain how to install the switch on a DIN rail or in a rack. Refer to the switch hardware guide for instructions on mounting the switch on a wall:

•Equipment That You Supply, page 12

•Before You Begin, page 12

•Installation Warning Statements, page 13

•Mounting the Switch to a DIN Rail or to the Rack Adapter, page 16

•Grounding the Switch, page 17

•Wiring the DC Power Source, page 18

 

 

Cisco IE 3000 Switch Getting Started Guide

 

 

 

 

 

 

OL-16234-01

 

 

11

 

 

 

Page 10 Page 12
Image 11
Page 10 Page 12
Contents About This Guide Cisco IE 3000 Switch Getting Started GuideTaking Out What You Need Connecting Expansion Modules 202334 203759 202335 Running Express Setup Connect power to the switch Connection Cisco IE 3000 Switch Getting Started Guide Refreshing the PC IP Address Managing the SwitchUsing the Device Manager Downloading Cisco Network Assistant Command-Line InterfaceOther Management Options Installing the SwitchBefore You Begin Equipment That You SupplyInstallation Warning Statements 140F 60C Statement Cisco IE 3000 Switch Getting Started Guide Foot Latch Mounting the Switch to a DIN Rail or to the Rack AdapterInch 12.7 mm Grounding the SwitchFollow these steps to prepare the DC power cable Wiring the DC Power SourceInch 6.6 mm Attaching the Power and Relay Connector Optional Procedures Connecting to the Switch PortsConnecting to 10/100 and 10/100/1000 Ports Installing SFP Modules and Connecting to Ports Verifying Port Connectivity Connecting to Dual-Purpose PortsConnecting to 100BASE-FX Ports Case of Difficulty Troubleshooting Express SetupResetting the Switch For More Information Accessing Online HelpCisco One-Year Limited Hardware Warranty Terms Obtaining Documentation and Submitting a Service RequestDuration of Hardware Warranty To Receive a Return Materials Authorization RMA Number Cisco IE 3000 Switch Getting Started Guide Cisco IE 3000 Switch Getting Started Guide
Top Page Image Contents