Cisco Systems IE 3000 warranty Equipment That You Supply, Before You Begin

Page 12

Cisco IE 3000 Switch Getting Started Guide

Attaching the Power and Relay Connector, page 20

Optional Procedures, page 21

Equipment That You Supply

Obtain these necessary tools and equipment:

Ratcheting torque flathead screwdriver that exerts up to 15-inch pound (in-lb) of pressure

Ring terminal lug (such as Thomas & Bett part number 10RC6 or equivalent)

Crimping tool (such as Thomas & Bett part number WT2000, ERG-2001, or equivalent)

10- to 12-gauge copper ground wire (such as Belden part number 9912 or equivalent)

For DC power connections, use UL- and CSA-rated style 1007 or 1569 twisted-pair copper appliance wiring material (AWM) wire (such as Belden part number 9318)

Wire-stripping tools for stripping 10-, 12-, and 18-gauge wires

For rack-mounting, a number-2 Phillips screwdriver

A flat-blade screwdriver

Before You Begin

When you determine where to install the switch, verify that these guidelines are met:

Operating environment is within the range in the switch hardware installation guide.

Clearance to front and rear panels meets these conditions:

Front-panel LEDs can be easily read.

Access to ports is sufficient for unrestricted cabling.

Front-panel direct current (DC) power and relay connector is within reach of the connection to the DC power source.

 

Cisco IE 3000 Switch Getting Started Guide

12

OL-16234-01

Image 12
Contents Cisco IE 3000 Switch Getting Started Guide About This GuideTaking Out What You Need Connecting Expansion Modules 202334 203759 202335 Running Express Setup Connect power to the switch Connection Cisco IE 3000 Switch Getting Started Guide Managing the Switch Using the Device ManagerRefreshing the PC IP Address Command-Line Interface Downloading Cisco Network AssistantInstalling the Switch Other Management OptionsEquipment That You Supply Before You BeginInstallation Warning Statements 140F 60C Statement Cisco IE 3000 Switch Getting Started Guide Mounting the Switch to a DIN Rail or to the Rack Adapter Foot LatchGrounding the Switch Inch 12.7 mmWiring the DC Power Source Follow these steps to prepare the DC power cableInch 6.6 mm Attaching the Power and Relay Connector Connecting to the Switch Ports Optional ProceduresConnecting to 10/100 and 10/100/1000 Ports Installing SFP Modules and Connecting to Ports Connecting to Dual-Purpose Ports Connecting to 100BASE-FX PortsVerifying Port Connectivity Troubleshooting Express Setup Case of DifficultyResetting the Switch Accessing Online Help For More InformationObtaining Documentation and Submitting a Service Request Cisco One-Year Limited Hardware Warranty TermsDuration of Hardware Warranty To Receive a Return Materials Authorization RMA Number Cisco IE 3000 Switch Getting Started Guide Cisco IE 3000 Switch Getting Started Guide