Cisco Systems IE 3000 Managing the Switch, Refreshing the PC IP Address, Using the Device Manager

Page 9

Cisco IE 3000 Switch Getting Started Guide

Refreshing the PC IP Address

After you complete Express Setup, you should refresh the PC IP address:

For a dynamically assigned IP address, disconnect the PC from the switch, and reconnect the PC to the network. The network DHCP server assigns a new IP address to the PC.

For a statically assigned IP address, change it to the previously configured IP address.

Managing the Switch

After you complete Express Setup and install the switch in your network, use the device manager or other management options described in these sections for additional configuration:

Using the Device Manager, page 9

Downloading Cisco Network Assistant, page 10

Command-Line Interface, page 10

Other Management Options, page 11

Using the Device Manager

The simplest way to manage the switch is by using the device manager that is in the Cisco IOS image. The device manager has a web interface that simplifies configuration and monitoring of the switch. You can access the device manager from anywhere in your network through a web browser.

Follow these steps:

1.Launch a web browser on your PC or workstation.

2.Enter the switch IP address in the web browser, and press Enter. The device manager page appears.

Cisco IE 3000 Switch Getting Started Guide

 

OL-16234-01

9

 

Image 9
Contents About This Guide Cisco IE 3000 Switch Getting Started GuideTaking Out What You Need Connecting Expansion Modules 202334 203759 202335 Running Express Setup Connect power to the switch Connection Cisco IE 3000 Switch Getting Started Guide Managing the Switch Using the Device ManagerRefreshing the PC IP Address Downloading Cisco Network Assistant Command-Line InterfaceOther Management Options Installing the SwitchBefore You Begin Equipment That You SupplyInstallation Warning Statements 140F 60C Statement Cisco IE 3000 Switch Getting Started Guide Foot Latch Mounting the Switch to a DIN Rail or to the Rack AdapterInch 12.7 mm Grounding the SwitchFollow these steps to prepare the DC power cable Wiring the DC Power SourceInch 6.6 mm Attaching the Power and Relay Connector Optional Procedures Connecting to the Switch PortsConnecting to 10/100 and 10/100/1000 Ports Installing SFP Modules and Connecting to Ports Connecting to Dual-Purpose Ports Connecting to 100BASE-FX PortsVerifying Port Connectivity Case of Difficulty Troubleshooting Express SetupResetting the Switch For More Information Accessing Online HelpCisco One-Year Limited Hardware Warranty Terms Obtaining Documentation and Submitting a Service RequestDuration of Hardware Warranty To Receive a Return Materials Authorization RMA Number Cisco IE 3000 Switch Getting Started Guide Cisco IE 3000 Switch Getting Started Guide