Cisco IE 3000 Switch Getting Started Guide
In Case of Difficulty
See these sections if you have difficulty setting up your switch:
•Troubleshooting Express Setup, page 25
•Resetting the Switch, page 26
•Accessing Online Help, page 27
•For More Information, page 27
Troubleshooting Express Setup
Help with the initial switch configuration is provided here. For additional assistance, see the online documentation at Cisco.com.
| Checklist | Recommendation | ||
|
|
| ||
| Was the SETUP LED blinking | If no, or you are not sure, restart the switch. Make sure that the | ||
| when you pressed the Express Setup | SETUP LED is blinking when you press the Express Setup | ||
| button? | button. | ||
|
|
| ||
| Did you connect your PC to the | Verify that you are connected to the switch port with the blinking | ||
| wrong switch port? | LED. | ||
|
|
| ||
| Did you start a browser session on | If yes, or you are not sure, restart the switch, and repeat the | ||
| your PC before the SETUP LED | Express Setup procedure. | ||
| was solid green? |
|
|
|
|
|
| ||
| Did you start a browser session on | If the window does not appear, enter a URL in your browser, such | ||
| your PC and the | as Cisco.com or another | ||
| appear? |
|
|
|
|
|
| ||
| Did you have a | If yes, disconnect the cable from the switch port, disable the | ||
| running on your PC when you | |||
| connected to the switch port? | the cable to the blinking Ethernet port. | ||
|
|
| ||
| Did you have proxy settings | If yes, disconnect the cable from the switch port, disable the | ||
| enabled in your browser software | proxy settings, press the Express Setup button, and reconnect the | ||
| when you connected to the switch | cable to the blinking Ethernet port. | ||
| port? |
|
|
|
|
|
|
|
|
|
| Cisco IE 3000 Switch Getting Started Guide |
|
|
|
|
| ||
|
|
| 25 | |
|
|
| ||